Search Results
Showing results for tool
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...2. Line up your Ring Video Doorbell 3 To properly line up your Ring Video Doorbell 3: Click the level tool (included in the box) into the small hole on the front of the Ring Video Doorbell 3 below the camera. Place the Ring Video Doorbell 3 next to your...
Checking Device Health in the Ring app
...Status : This will show if the device is online or offline. Change network: This tool allows you to change your wifi network. You must be near your device and have your wifi password handy. Wifi passwords are case sensitive. Device...
Installing Battery Doorbell Pro (2nd Gen)
...Hardware included Tools included Removal tool Tools needed Phillips-head screwdriver Drill with a 6 mm masonry bit (optional) 1. Remove the protective wrap. 3. Remove the battery. 2...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...Plug your network cable into your PoE switch. 5. Ring your doorbell to ensure everything is working properly. Hardware included Tools included Tools needed Phillips-head screwdriver Drill with a 1/4 in (6 mm) masonry bit (optional) Remove the protective wrap. 2. Download the Ring app. 3. Scan...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...Ring and all related marks are trademarks of Ring LLC or its affiliates. Hardware included Tools included Removal tool Tools needed Phillips-head screwdriver Drill with a 1/4 in (6 mm) masonry bit (optional) 1. Download the Ring app. 2. Scan the QR code. 3. Remove the...
Installing Wedge Kit for Wired Video Doorbell Pro (3rd Gen)
...these step-by-step installation instructions for your Wedge Kit for Wired Video Doorbell Pro (3rd Gen). Hardware Included Tools Included Removal tool Tools Needed Phillips-head screwdriver Drill with a 6 mm masonry bit (optional) 1. Refer to your doorbell setup guide to prepare your install location...
Installing Wired Video Doorbell Elite (2nd Gen)
...information for Wired Video Doorbell Elite (2nd Gen) Hardware included Tools needed Flathead screwdriver Phillips-head screwdriver Tools included Removal tool 1. Remove the protective wrap. 2. Download the Ring app. 3. Scan the QR code on your device. 4. Assess your wall’s construction...
Installing Ring Door View Cam
...remove paint covering the edges or slots. 3. Remove the indoor half of the peephole. On the indoor side, place the flat edge of the included tool into the slots on your peephole and rotate counter-clockwise to unscrew it. Once it's loose enough, you can use your fingers to finish unscrewing...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit. 5. If your doorbell has a faceplate, use the removal tool included with your doorbell to remove it...
Installing lens cover for Outdoor Cam Pro
...Get step-by-step installation instructions for your lens cover for Outdoor Cam Pro. Lens Cover for Outdoor Cam Pro | 1EN Tools needed Phillips-head screwdriver NOTE: Do not use a drill during installation. Using a drill may damage the lens cover or your device. Flat...