Search Results for Ring Help
Showing results for rotate
Installing Pole and Wall Mount for Cameras and Solar Panels
...Slide your camera’s native mounting plate in the direction opposite to the UP arrow to remove. 8. Mount your camera onto the mounting bracket. 9. Rotate your camera and remove the rubber cap on the base. 10. Tighten the security screw included with your camera. 11...
Ring Gutter Mount Installation Guide
...Up Cam. 3. For Spotlight Cam For Stick Up Cam 4. Half-round gutter shown. More gutter types can be found at the end of this user guide. 5. 6. Rotate the knob to secure the support against the front of the gutter...
How to Uninstall Your Peephole Cam
...Measure the hole diameter and your door's thickness. Once that's done, place the flat edge of the Peephole Key into the slots on your peephole and rotate clockwise to screw it in. If you don’t have the Peephole Key, you can use a large flathead screwdriver or another flat tool...
Installing the Hardwiring Kit for cameras
...6: Adjust camera angle You can rotate the camera to adjust the field of view. Remove the protective film from the device to allow motion detection and proper view. Use the Live View feature in the Ring app to make sure the camera is monitoring the desired area. Rotate the camera to adjust the view...
Installing Spotlight Cam Plus and Pro
...the camera angle You can rotate the camera to adjust the field of view. Remove the protective film from the device to allow motion detection and proper view. Use the Live View feature in the Ring app to make sure the camera is monitoring the desired area. Rotate the camera to adjust the view...
Installing Stake Mount for Solar Panels and Cameras
...3. Plug in the power cable. Adjusting your mount Loosen the knob to adjust camera angle, then tighten to secure. Rotate the camera mount pole 360 degrees. Loosen ring to tilt or rotate solar panel mount, then tighten to secure...
Ring Alarm Keypad (1st Gen) Lights and Buttons Explained
...battery drained completely and is powered back on by plugging it in with a charging cable. Before the Keypad has been added to the Base Station Rotating blue light Ready to pair via Z-Wave Slow flashing blue light Z-Wave pairing in progress Solid blue light for five seconds Z-Wave pairing...
Setting Up and Installing your Ring Smart Lighting Solar Floodlight
...Loosen the screw on the mounting arm and adjust the panel to your desired angle, then re-tighten the screw to secure your setting. You can also rotate the panel to adjust its positioning. Once your Solar Panel is mounted, insert the power plug into the power input at the bottom of your Floodlight...
Preventing false alarms
...Pets, light changes, and moving objects: Check that motion in your home (including balloons, rotating fans, shiny objects, flickering lights, and curtains placed over an air vent) won’t accidentally set off Motion Detectors. Any movement within...
Installing and using Ring Alarm Keypad
...through the house. Away All sensors are monitored. Secure your whole house. Home Some sensors are monitored. Freedom and security, mixed. Blue Rotating Blue Solid for 5 seconds Blue Blinking Waiting to connect Connected Connecting to Base Station 4. Install your Ring Keypad on the wall. 3...