Top Three Security Camera Tips

If your battery-powered Ring security camera is offline, it could be because the battery needs to be recharged, it's disconnected from wifi, or both.

Keep these three things in mind to get the best performance.

Make sure your battery is charged to 100%

Charge your battery until the orange light disappears and only the green light is lit

In the Ring app, red means the battery is at 30% or lower. Green means it's charged to 70% or above.

Charge the battery right out of the box for best results

Due to safety regulations for shipping lithium batteries, we can’t package them 100% charged.

The battery will have enough charge to set up the security camera in the Ring app, but it can take six to eight hours to charge fully.

You can always check your battery's charge in the Ring app. Follow the steps below.

1. Open the Ring app.
2. Tap the

   menu (≡) 

   on the top left of your Dashboard.
3. Tap

   Devices

   .
4. Tap the Security Camera you want to check.
5. Tap

   Device Health.
6. Check the battery percentage under

   Battery Level.

Place your wifi router in an open space so your signal isn't blocked

Ring devices use wifi. The stronger the signal, the better the performance. To keep your security camera connected consistently, make sure your wifi router isn’t blocked by large metal objects, concrete walls, or stuck behind the couch or in a closet.

Move your router from behind couch

Move your router out of closet

If your device is disconnected, try reconnecting to wifi in the Ring app.

• It's best to use the same mobile device you used to set up your security camera.
• Have your wifi password handy. Remember that wifi passwords have no spaces and are case sensitive. They are often printed on your router.

To reconnect:

1. Open the

   Ring app

   .
2. Tap the

   menu (≡) 

   on the top left of your Dashboard.
3. Tap

   Devices

   .
4. Select your security camera by tapping on the image.
   • On the Device Screen,

     a GREEN wifi icon

     means strong signal strength.

     A RED wifi icon

     with a slash means your device is disconnected from wifi.
5. Tap the

   Device Health

   tile below the picture of the camera.
6. Tap

   Reconnect to Wifi

   and follow the prompts.