Search Results
Showing results for plate
Using the adapter plate included with your Ring Video Doorbell 2
...plate with it's smaller side (or the beveled edge) facing the wall. 2. Use the original drill holes You can line up the holes in the adapter plate with the holes left behind from your original Ring mounting bracket. Then use the install screws to attach the adapter plate to the wall...
Installing Floodlight Cam Wired Plus and Pro
...Install the mounting plate Run the wires through the hole in the mounting plate. Install the mounting plate with the two posts level with the ground, or level with the wall if mounting on an eave or overhang. Ensure the “UP” arrow is pointing upwards for...
Installing Stick Up Cam Pro
...If mounting on a ceiling, eave, or overhang , the UP arrow should point away from the area you want to monitor. Step 4: Installing the mounting plate Warning: Only use the included mounting screws when securing the mounting plate, and avoid positions that have electrical wiring behind the plate...
Installing Stick Up Cam
...area. Warning: Only use the included mounting screws when securing the mounting plate, and avoid positions that have electrical wiring behind the plate. Do not drill into your home's electrical wiring. If installing on a wood surface , screw the mounting plate directly into the wall. If installing...
Installing your Pan-Tilt Indoor Cam
...Use the mounting plate as a guide to mark screw holes on the ceiling with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to...
Installing Indoor Cam Plus
...plug it into an outlet. Ceiling installation 1. Slide the mounting plate in the opposite direction of the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the ceiling. 3. Install the mounting plate with the UP arrow pointing toward your desired viewing direction. On...
No-Drill Mount for Ring Video Doorbell (2nd Generation)
...Frequently asked questions What is the No-Drill Mount? The No-Drill Mount for Ring Video Doorbell (2nd Generation) is a mounting plate specifically designed for this device. Perfect for renters who can’t drill holes in their homes, with it you can mount your new Ring Video...
Installing Spotlight Cam Plus or Pro
...pull it away from the camera mount. Step 6: Install the mounting plate WARNING! Only use the included mounting screws when securing the mounting plate. CAUTION! DO NOT drill into your home’s electrical wiring. Choosing mounting plate direction If installing on a wall: Place the plate with the UP...
Installing Outdoor Cam Pro PoE
...to remove. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. Unscrew to...
Ring Spotlight Cam Battery Installation
...Cam on an eave or overhang, insert the mounting plate with the ball socket pointing up. Step Five - Identify a Mounting Plate Orientation Spotlight Cam comes with a mounting plate that, depending on its orientation, allows you to mount it on a wall or under an overhang. To mount your Spotlight Cam...