Search Results
Showing results for -light
Installing battery-powered doorbells
...While charging, your battery displays two coloured lights, a solid green and an amber light. Charge the battery until only the green light remains lit. Doorbells with a built-in battery Fully charge the built-in battery by plugging it into a...
Ring device manuals
...on the front of your Stick Up Cam is flashing after setup, it’s updating its software. Do not remove the battery from your Stick Up Cam while the light is flashing! 02_Stick_Up_Cam_Battery_MANUAL_Canada_EN.indd 4-511/15/18 2:58 PM 3. Install your Stick Up Cam Battery. How to use Stick Up...
Amazon Key Access troubleshooting for residents
...s internet connection is stable. Tap on the panel to check if the residents’ list is loading. Please note the colour of the light when your visitor taps on the panel: No Light: Your panel is not receiving power or not receiving signal from the mobile phone...
Installing your Indoor Cam (1st Gen)
...the Ring app Try it out: After setup, tap the Live View button in the Ring app to see live video from your Indoor Cam. Blue light flashing? If the light on the front of your Indoor Cam is flashing after setup, it’s updating its software. Do not unplug your Indoor Cam while the light is flashing! 2...
Installing Stick Up Cam Pro
...the charging cable to the battery's charging port. While charging, your battery displays two coloured lights, a solid green and an amber light. Charge the battery until only the green light remains lit. 3. Insert the charged battery into the bottom of your Stick Up Cam Pro until it clicks into...
Accessing and controlling devices in the Ring app
...Some tiles, like Light Groups, also provide access to their connected devices. Customising your Devices view In the Devices section, you can customise which devices you...
Safety and compliance information for Spotlight Cam Pro (2nd Gen)
...The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Following periods of extended use, the Spotlight Cam Pro (2nd Gen) may feel...
Installing Wired Video Doorbell Elite (2nd Gen)
...9. Plug the Ethernet cable into the back of your doorbell. Important note: When properly connected, the front light will begin spinning. 10. Tuck the wires into the wall, then hook your doorbell over the mounting bracket to attach. 11. Tighten the security...
Installing your Hardwired Kit for Spotlight Cam
...licensed electrician. If your local laws require it, hire a licensed electrician to complete all installation and wiring. 2. Remove your existing light or camera (if applicable) With power off at the consumer unit, remove your existing Spotlight Cam Wired from the electrical box and disconnect the...
Installing Stick Up Cam
...the charging cable to the battery's charging port. While charging, your battery displays two coloured lights, a solid green and an amber light. Charge the battery until only the green light remains lit. 2. Twist the battery cover counterclockwise to unlock, then remove it from your Stick Up Cam...