Search Results
Showing results for rotate-for
Installing Spotlight Cam Plus or Pro
...the camera angle You can rotate the camera to adjust the field of view. Remove the protective film from the device to allow motion detection and proper view. Use the Live View feature in the Ring app to make sure the camera is monitoring the desired area. Rotate the camera to adjust the view...
Uninstalling your Door View Cam
...if you're not sure what will be compatible. Once that's done, place the flat edge of the Door View Key into the slots on your peephole and rotate clockwise to screw it in. If you don’t have the Door View Key, you can use a large flathead screwdriver or another flat tool...
Installing Stake Mount for Solar Panels and Cameras
...3. Plug in the power cable. Adjusting your mount Loosen the knob to adjust camera angle, then tighten to secure. Rotate the camera mount pole 360 degrees. Loosen ring to tilt or rotate solar panel mount, then tighten to secure...
Physically installing your Stick Up Cam Elite
...rubber pad from the base. You’ll put the cover back on once you’ve mounted your Stick Up Cam. 2. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceiling mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam...
Installing Video Doorbell Elite
...Elite Mounting Bracket. 2. Feed any existing wires through the hole in the mount. 3. Use a screwdriver to tighten the screws. The wing clamps will rotate as the screws turn, locking the bracket to the wall. Step 3: Plugging in the Ethernet cable The Video Doorbell Elite must be connected to power...
Floodlight Cam Installation Guide
...Floodlight Cam for installation A) Loosen the knobs on the light fixtures to rotate them out of the way and allow access to the mounting screws. Do not remove your Floodlight Cam from the ball socket on the base. B) Rotate the camera 180 degrees since Floodlight Cam ships with the camera upside...
Installing Wired Video Doorbell Elite (2nd Gen)
...and wiring must be routed from inside your wall. 5. Use the included screws to install the electrical box. Important note: The wing clamps will rotate as the screws turn to secure the electrical box in place. 6. Install the mounting bracket onto the electrical box. 7. Use the removal tool to...