Search Results for Ring Help
Showing results for rotate
Fixing Upside-Down Indoor Cam Videos
...s video orientation in the Ring app. How to rotate video orientation in the Ring app Open the Ring app to the main dashboard. Tap more (•••) on the camera you want to access. Tap your device's Settings . Tap Device Settings. Tap Video Settings. Tap Rotate Video to toggle video orientation. Remember...
Remounting Outdoor Cams and Stick Up Cams to fix rotated view
...If the view from your Outdoor Cam or Stick Up Cam is upside-down, inverted or rotated, your camera is most likely not in its ideal mounted position. These devices have a fixed-view orientation and must be installed in an upright...
Control Pan-Tilt Cameras in the Ring App
...buttons in the app. Tap Save . Note: The camera will need to recalibrate when you change the Home Position. Panning and tilting In Live View, tap Rotate then use the horizontal and vertical motion control arrows to pan or tilt your camera. Tap and hold an arrow to move your camera until you lift...
Installing Stick Up Cam Elite
...side down. Then mount it with the included screws. Then, head to page 14 for the final steps. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceiling- mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam. Remove the plastic...
Physically Setting Up Your Ring Jobsite Security Case
...Next rotate it so the USB-C power ports are on the right side. Make sure the air vents are not blocked. 2. Power Adapter. Plug the power adapter from your...
Installing Floodlight Cam Pro (2nd Gen)
...10. Rotate the lights out of the way, then rotate your camera clockwise. 11. Remove the shank from the included screwdriver and use the handle to tighten the hex nuts. Then...
Tips for Installing Contact Sensor (2nd Gen)
...1 inch apart, and you see the LED blink and hear the chime when you open the door or window. Rotate the magnet or sensor for a more secure fit. Rotate the Contact Sensor or the magnet so they meet at a right angle. In order to make these fit, your Contact Sensor may need to be mounted about 3/4...
Installing Stick Up Cam Pro
...If using the Plug-In Adapter, you can secure the power adapter to the wall with the included mounting screws. Step 10: Adjusting the camera angle Rotate the camera to focus on the area you wish to monitor. Look at Live View in the Ring app to make sure the field of view is accurate. Tighten the...
View or download the manual for Ring devices
...mounting vertically on a wall, skip ahead to page 24. Rotate the Motion Sensor. 180 ̊ You may need to hold the motion sensor’s locking collar in place while rotating to keep it from unlocking. A B Push the motion sensor to the right, then rotate it counter-clockwise 180°. The motion sensor will now...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...its screw. 6. Secure your camera to the mounting plate by sliding until you feel a click. NOTE: Your camera should be in an upright position. 7. Rotate your camera and tighten the security screw. 8. Adjust your camera’s position and tighten the ball joint to secure in place. 9. Plug the power...