Search Results for Ring Help
Showing results for installable
Installing Outdoor Cam
...Step 4: Installing on a wall or ceiling To install on a ceiling, use the mount for Outdoor Cam. Install the mounting plate On walls: UP arrow points upward. On ceiling and eaves: UP arrow points toward...
Installing Indoor Cam
...We recommend placing your device on a heat-resistant surface. Step 3: Install Indoor Cam Installing on a table or shelf Indoor Cam comes with the base installed for placement on a flat surface, such as a table or shelf. Installing on a wall or ceiling 1. Remove the mounting plate. Slide the mounting...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included...
Installing Outside Door Sensor
...2. Install the mounting brackets. Drill installation 1. Use the mounting brackets as guides to mark screw holes on the door or window and frame. NOTE: Ensure no more than 1 in...
Installing your Solar Panel (USB-C) (2nd Gen)
...This article outlines the step-by-step process to install the Solar Panel (USB-C) (2nd Gen) . Choose an install location with the most direct sunlight. If you are in the Northern Hemisphere, direct your Solar Panel toward the south. If you are in the...
Installing battery-powered doorbells
...In Adapter, or doorbell wiring) before mounting. Use only one power source. Solar chargers Make sure to install the Solar Charger where it will get direct sunlight. Learn more about installing a solar charger for your doorbell. Plug-In Adapter If you are using a Plug-In Adapter, select No chime or...
Installing Wired Doorbell Pro
...The Pro Power Kit ensures that your Ring Doorbell gets the power it needs, and must be installed before you install your Ring Doorbell. Your Ring Doorbell is compatible with doorbell systems supplying 16–24 volts AC at 50 or 60Hz, 40VA max. The AC...
Installing Intercom Kit for Video Doorbells
...shock. Installation by a qualified electrician may be required in your area. Refer to your local laws and building regulations before performing electrical work; permits and/or professional installation may be required by law. Turn off power at the consumer unit before installing...
Installing Outdoor Cam Pro Plug-In
...3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included...
Installing Pan-Tilt Indoor Cam
...with 16.5 cm (6.5 inches) of space in every direction and plug in. Wall installation Use the mounting plate as a guide to mark screw holes on the wall with 6.5 inches (16.5 cm) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or...