Search Results for Ring Help
Showing results for mount
Placing Your Solar Smart Lights for Optimum Performance
...Solar Steplight directly underneath heavy overhangs, like step or deck railings. Instead, try mounting your light on the railing itself, the top of the deck post, or even on the top of fences. Mounting a bit higher not only increases your likelihood of maintaining a good charge with adequate...
Installing Hardwired Transformer Kit
...Mounting Screws Use to mount your transformer, if you’re not attaching it to a junction box. Wall Anchors Use when mounting to a hard surface such as brick or concrete. Shut off Power at the Breaker You’ll be...
Installing Floodlight Cam Pro (2nd Gen)
...and the mounting surface. Floodlight Cam Pro (2nd Gen) | 7EN 4. Remove the mounting plate from the back of your camera fixture. 5. Align the mounting plate over the metal mounting bracket. 6. Feed the wires over the metal mounting bracket, through the mounting plate, and attach with the...
Installing Wedge Kit for Wired Doorbell Plus (2nd Gen)
...multiple wedge or corner mounts, insert the included screws through both mounts to hold them together. NOTE: We do not recommend using more than two. 5. Attach your doorbell’s mounting bracket over the mount. 6. Refer to your doorbell setup guide to complete setup...
Physically Setting Up Your Ring Jobsite Security Case
...the two hook brackets to the back side of the case using 2 screws per bracket included in Bag B. Similar to how you might mount a TV, slide the case onto the mounting plate using the hook brackets, then secure the case by inserting a screw from Bag B into the the top of each hook bracket...
Safety and Compliance Information for Ring Jobsite Security Case
...of the case may create risk of injury. Follow mounting instructions and mount the case only on stable surfaces. Only use the provided mounting hardware to mount the case. Local building codes may restrict the use of the case and its accessories. Refer to local building codes before installation...
Installing Solar Charger for battery-powered doorbells
...Remove the faceplate. Remove the mounting screws. For doorbells with a built-in battery: Remove the security screws. Remove the doorbell from the mounting plate. Remove the mounting screws. Remove the mounting bracket...
Hardwiring your battery-powered Ring doorbell
...Remove any Ring doorbells, mounts, and brackets from the wall. Doorbell with a built-in battery Doorbell with a removable battery Step 3: Bypassing an in-home chime or hardwiring...
Installing Spotlight Cam Plus and Pro
...it counter-clockwise. Insert the ball joint plate with the ball joint pointing up. Step 5: Remove the mounting plate from the camera mount Slide the mounting plate down, and gently pull it away from the camera mount. Step 6: Install the mounting plate WARNING! Only use the included mounting...
Learn About Super Solar Panel for Outdoor Cam and Spotlight Cam
...mount the Super Solar Panel directly into wood using the provided screws and screwdriver. If you are mounting to brick, concrete, or stucco, do the following: Mark the holes where you wish to mount your Super Solar Panel. Drill a hole for the anchors using the provided drill bit. Insert the anchors...