Search Results
Showing results for drill
Ring device manuals
...is in the box. Screwdriver - Use the Phillips end for the mounting screws and star-shaped end for the security screw. Drill Bit and Anchors - Use the drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting Screws - Use two to...
Installing Stick Up Cam Pro
...into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. 1...
Installing Pole and Wall Mount for Cameras and Solar Panels
...clamp reaches the side of the mount, re-insert and tighten until fully secured. Wall installation Use the drilling template for your mount as a guide to mark screw holes on the wall. Drilling template Print page at 100%. If credit card fits here, page size is accurate. 1. Attach the mount using...
Installing Battery Doorbell Pro (2nd Gen)
...6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with...
Installing Wired Video Doorbell (2nd Gen)
...wiring and pipes when drilling. 4. Use the mounting bracket as a guide to mark screw holes on the wall. Wired Doorbell (2nd Gen) | 4EN 5. Install the mounting bracket with the included screws.NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included...
Installing battery-powered doorbells
...device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit...
Installing Outdoor Cam Plus Plug-In
...holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route...
Installing Outdoor Cam Pro PoE
...Install the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into the adapter until the indicator line disappears...
Installing and using Ring Alarm Keypad
...to a wall Slide the bracket off the back of the Keypad. After you've decided where you want to install the Keypad, use the bracket to mark the drill holes. If installing on drywall: Use a 5 mm drill bit to pre-drill holes, then push the anchors into the holes. Use a Phillips-head screwdriver...