Search Results
Showing results for surface
Installing Stick Up Cam Pro
...plate, and avoid positions that have electrical wiring behind the plate. Do not drill into your home's electrical wiring. If installing on a wood surface, screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using...
Installing Stick Up Cam
...If installing on a wood surface , screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide...
Installing Indoor Cam Plus
...Scan the QR code on your device. 4. Choose a location. Flat Installation 1. Place your camera on a level surface. 2. Plug the power cable into your camera. 3. Connect the power cable to the power adapter and plug it into an outlet. 4. Secure the power cable...
Installing No-Drill Mount for Ring battery doorbells
...and wipe it clean. Do not install on glass. 2. Remove the protective strips from the adhesive tape. 3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere. 4. Remove your doorbell’s faceplate. 5. Attach your doorbell using the four included...
Installing Floodlight Cam Wired Pro (2nd Gen)
...Do not install near combustible or flammable surfaces. Note : Your Floodlight Cam must be installed on a 4 in round UL-listed weatherproof electrical box. This manual is for informational purposes...
Installing Spotlight Cam Plus or Pro
...the screws If installing on a wood surface : Screw the plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface: Mark four screw holes using the plate as a guide...
Safety and compliance information for Ring Spotlight Cam Plus
...create risk of injury or damage to your device. Follow all mounting instructions and mount only on stable surfaces. Only use mounting hardware that is appropriate for your mounting surface to mount your device. Use caution when installing and mounting your device at an elevated position. Failure...
Safety and compliance information for Ring Spotlight Cam Pro
...create risk of injury or damage to your device. Follow all mounting instructions and mount only on stable surfaces. Only use mounting hardware that is appropriate for your mounting surface to mount your device. Use caution when installing and mounting your device at an elevated position. Failure...
Ring Spotlight Cam Battery Installation
...can face either up or down, so experiment until you find what you like best. Use the bracket to mark your holes. If installing on a masonry surface like stucco or brick, use the provided drill bit to make your holes, then insert wall anchors before installing the screws. If installing on a...
Installing Solar Charger for battery-powered doorbells
...Remove the doorbell from the mounting plate. Remove the mounting screws. Remove the mounting bracket. Step 2: Preparing the mounting surface Warning: Only use the included mounting screws when securing the doorbell or Solar Charger to the wall, and avoid positions that have electrical...