Search Results
Showing results for i-remove
Installing Battery Doorbell (2nd Gen)
...included Tools included Tools needed Phillips-head screwdriver Drill with a 1/4 in (6 mm) masonry bit (optional) Remove the protective wrap. 2. Remove the rubber plug from your doorbell’s power port. 3. Fully charge battery with a USB-C cable (not included). 4. Reinsert the rubber plug into your...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...Remove the protective wrap. 2. Download the Ring app. 3. Scan the QR code on your device. 4. Choose a location near an outlet. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide...
Using Auto-Verified Guest with your Ring Intercom
...corner Tap Devices Tap your Ring Intercom Tap Shared Access on the Device Dashboard Tap Manage Access Tap the user you want to remove from the Shared Users list Tap Remove User How to use the Guest Key as an Auto-Verified Guest If you have been added as an Auto-Verified Guest by a Ring Intercom...
Charging your Ring Security Camera batteries
...Use the included screwdriver to remove the security screw prior to removing the cover. View the installation article for details . For all other Spotlight Cam variations: Press the release button under the mounting arm to open the battery hatch. Remove the battery: Press the metal release...
Installing Doorbell Retrofit Kit
...Australian and New Zealand Customers Installation and wiring must be performed by a licensed electrician. 2. Remove your existing Ring doorbell, if necessary. 3. Use the guide to remove the correct rubber plugs and mark the right screw holes for your doorbell...
The difference between the Pro Power Cable and Pro Power Kit v2 (for Ring Video Doorbell Pro)
...Remove the cover from your internal doorbell chime. Loosen the screws holding the doorbell wires. Detach the doorbell wires from the internal doorbell...
Installing your Hardwired Kit for Spotlight Cam
...installation and wiring. 2. Remove your existing light or camera (if applicable) With power off at the consumer unit, remove your existing Spotlight Cam Wired from the electrical box and disconnect the wires. If there is a bracket attached to your electrical box, remove that as well...
Using privacy features in the Ring app
...Privacy Zones . To edit, click on the box, and adjust the edges to cover the designated area. Tap Done . To delete, select the zone you wish to remove. Tap the trash can icon...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...over the mounting bracket to attach. 8. Refer to your doorbell setup guide to reattach the faceplate and secure your doorbell. Removing your mount 1. Remove your doorbell and Wedge or Corner Kit (if installed). 2. Flip down both pull-tabs. 3. Firmly hold the mount and gently pull down on...
Upgrading from Video Doorbell Elite to Wired Video Doorbell Elite (2nd Gen)
...the flexible screwdriver bit, a Torx T6 screwdriver can be used to unlock the security screw. Remove the screw and faceplate. Step 2: Removing the doorbell from the bracket Use a PH2 screwdriver to remove the screws from the holes on the bracket. Gently pull the doorbell and wires from the wall...