Search Results
Showing results for walls
Ring Spotlight Cam Wired Installation
...features a built-in level. Install Screws (5): Use these to install the mounting bracket on your wall. Wall Anchors (16): Use these to attach the mounting bracket and the cable clips to your wall, if installing on a masonry surface, such as stucco or brick...
Hardwired Kit for Cameras Installation Guide
...For wall installation 3b. For ceiling installation 4. Connect USB-C cable. Plug the USB-C cable in to your camera's USB-C port. 5. Attach weather cover...
Installing Wired Video Doorbell Plus (2nd Gen)
...it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it...
Installing Wedge Kit for Wired Video Doorbell Pro (3rd Gen)
...the both top holes or both bottom holes, depending on your desired installation location. 3. Install the mount over your doorbell wires or on the wall with the included screws, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...Refer to your doorbell setup guide to prepare your install location. 2. Use the wedge mount as a guide to mark screw holes on the wall, if necessary. NOTE: Mark the both top holes or both bottom holes, depending on your desired installation location. 3. Install the mount over your...
Installing your Ring Indoor Cam (2nd Gen)
...cord. Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat and may result in a fire. If the adapter or cable appears damaged, discontinue use immediately. Flat installation: Wall or ceiling installation: Slide down to unhook and remove the...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...the slots on your Corner Mount (fig 1) If you are replacing a Ring Doorbell, align the two small screw holes with two of the existing holes in your wall (fig 2). 2. Install the anchors (optional) On stucco, brick, or concrete, use a 6mm masonry bit to drill holes in your wall, then insert the...
Installing Stick Up Cam Pro
...Step 9: Secure any cables and adapters Use provided cable clips to secure any cables to your wall. Use a 6 mm drill bit to pre-drill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick. If using the Plug-In Adapter, you can secure the...
Solar Charger for Ring Video Doorbell (1st Generation) Information
...this, it means that it is still updating and installing the firmware update. Give it a few minutes to complete. Do I have to drill new holes in the wall to install the Solar Charger? No. The Solar Charger can be mounted using the same holes as the original bracket. Note: If you used a wedge or...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...stacked together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it...