Search Results
Showing results for i-anchors
Installing Wired Video Doorbell (2nd Gen)
...bracket with the included screws.NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 7. Mount your doorbell by hooking it over the bracket and pushing down. 6. Connect the power cable to your doorbell’s wire terminals, ensuring...
Installing Spotlight Cam Plus or Pro
...brick, or stucco) surface: Mark four screw holes using the plate as a guide. Drill pilot holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. Step 7: Attach the camera mount to the mounting plate...
Hardwiring your battery-powered Ring doorbell
...a Wedge Kit, Corner Kit , or mounting bracket with your device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit. Insert the...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...2. Install the anchors (optional) On stucco, brick, or concrete, use a 6mm masonry bit to drill holes in your wall, then insert the included wall anchors. (If you’re installing on wood or siding, you can skip this step.) Note: Do not use any screw other than the included long mounting screws when...
Installing Floodlight Cam Wired Plus and Pro
...plate from the light fixture. Push gently on the threaded posts visible on the front of the fixture and pull the bracket free. 6. Install the anchors If you’re installing on wood, skip this step. If installing on stucco, brick or concrete, mark 2 drill holes using the plastic mounting plate as...
Installing Solar Panel for Battery Doorbells
...cable can reach your doorbell before securing. On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. Solar Panel for Battery Doorbells (2nd Gen) | 6EN 5. Install your doorbell’s mounting bracket. 4. Install the doorbell spacer with the included...
Installing Solar Charger for battery-powered doorbells
...through the Solar Charger into the wall anchors. Step 3: Mounting the Solar Charger Screw your Ring Solar Charger onto the wall or into the wall anchors. Then, install any Wedge Kits, Corner Kits, or mounting brackets onto the Solar Charger. Step 4: Connecting the doorbell to the Solar Charger For...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing PoE+ Adapter with Mount
...box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included plugs. 4...