Search Results
Showing results for -install
Installing your hardwired transformer kit
...and pull the wires straight out. Installing the Pro Power cable To bypass your internal doorbell with the Pro Power cable, complete the following steps: Your Pro Power cable should have two grey wire clips already fastened to the red wiring. For ease of installation, unclamp the clips that have no...
Installing No-Drill Mount for Battery Doorbells
...Install a doorbell with a mounting bracket 1. Choose a smooth, even mounting surface, and wipe it clean. NOTE: Do not install on glass. 2. Remove the protective strips from the adhesive tape. 3. Hold the mount...
Installing Intercom Kit for Video Doorbells
...shock. Installation by a qualified electrician may be required in your area. Refer to your local laws and building regulations before performing electrical work; permits and/or professional installation may be required by law. Turn off power at the consumer unit before installing...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. 5. Install the mounting bracket on your mount or directly over the doorbell wiring with the included...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...holes with two of the existing holes in your wall (fig 2). 2. Install the anchors (optional) On stucco, brick, or concrete, use a 6mm masonry bit to drill holes in your wall, then insert the included wall anchors. (If you’re installing on wood or siding, you can skip this step...
Installing Spotlight Cam Plus or Pro
...into your home’s electrical wiring. Choosing mounting plate direction If installing on a wall: Place the plate with the UP arrow pointing up. If installing on an eave or overhang: Place the plate with the UP arrow pointing toward the area you wish to view. Fastening the screws If installing on a...
Installing Floodlight Cam Wired Plus and Pro
...DO NOT INSTALL if a working earth connection is not available. Do not connect this light fixture to a dimmer switch or timer. CAUTION : Risk of fire. Do not install near combustible or flammable surfaces. Floodlight Cam Wired Pro and Plus must be installed on a wall or eave. Installation steps To...
Installing Wired Video Doorbell Plus (2nd Gen)
...a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 10. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. 11. Install the mounting bracket on your mount or directly over the doorbell wiring with the included...
Installing Video Doorbell Elite
...Kit Watch the video guide for installing Video Doorbell Elite Video Doorbell Elite Download the Ring app Search for “ring” in one of the app stores below or visit ring.com/app Install Ring Doorbell Elite Follow the steps at page 22, or in the Ring app, to install Ring Doorbell Elite. Set up Ring...
Installing Pole and Wall Mount for Cameras and Solar Panels
...guide to adjust your angle, secure your security camera, and complete setup. Choose a location. If installing a solar panel, ensure the mount is positioned under direct sunlight. Pole installation 1. Choose the right hose clamp. 2. Remove the silicone plugs from both sides of the mount. 3...