Search Results
Showing results for mount
Ring Pan-Tilt Mount Installation Guide
...This installation guide is for the Pan-Tilt Mount for Stick Up Cam. 1. 2. 3. For table mount: Adapter not included. For wall mount: 4. 5. Adapter not included. 6. 7. 8...
Safety and compliance information for Ring Pan-Tilt Mount
...CAUTION: Objects can be pinched between Pan-Tilt Mount and Stick Up Cam when tilted downwards. Do not place fingers or objects between Pan-Tilt Mount and Stick Up Cam. HANDLE WITH CARE. Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service...
Installing No-Drill Mount for Ring battery doorbells
...Do not install on glass. 2. Remove the protective strips from the adhesive tape. 3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere. 4. Attach the mounting bracket using the four included mounting screws. 5. Attach your doorbell to the mounting...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...Kit 1. Choose a smooth, even mounting surface, and wipe it clean. 2. Remove the protective strips from the adhesive tape. 3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere...
Positioning video doorbells and security cameras
...security cameras Security cameras come with an adjustable camera mount that allows you to change the angle for more flexibility when choosing a mounting position. Outdoor security cameras are designed to be mounted 2.5 to 3 metres from the ground with a 20-degree tilt for optimal...
Installing Battery Doorbell Pro (2nd Gen)
...2. Use the mounting bracket as a guide to mark screw holes on the wall. 3. (Optional) If using a corner mount, install the mount on the mounting surface using the bottom holes in the top and bottom sections, ensuring it is facing in your desired viewing direction. On stucco, brick...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...extenders using the included wire nuts. 5. Mount your Ring doorbell to the Corner Mount Secure your Ring doorbell to the Corner Mount with the two included short mounting screws. Be sure to feed any excess wiring back into the wall first. If you used the wire nuts, push them through the hole as...
Physically installing your Stick Up Cam Wired
...you’re mounting to a shelf or table, your Ring Stick Up Cam is now installed. Step Four (alternative): Mounting the Stick Up Cam Wired to a wall or ceiling with a rubber pad If you're mounting Stick Up Cam on a wall: Push the rubber pad into the top of the base Flip the base toward the rear. If...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...included wall anchors. 4. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. 5. Install the mounting bracket on your mount or directly over the doorbell wiring with the included screws. 6. Remove your doorbell’s faceplate by inserting...
Installing Wired Video Doorbell Plus (2nd Gen) Hardwired
...included wall anchors. 10. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. 11. Install the mounting bracket on your mount or directly over the doorbell wiring with the included screws...