Search Results
Showing results for stucco
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...If using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 7. (Optional) If installing multiple wedge or...
Installing Battery Doorbell Pro (2nd Gen)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a...
Installing Battery Video Doorbell Plus (2nd Generation)
...If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. Indoor Cam Plus | 5EN 4. Plug the power cable...
Installing Outdoor Cam Pro PoE
...Install the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable...
Installing Solar Panel for Battery Doorbells
...NOTE: Ensure the cable can reach your doorbell before securing. On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. Solar Panel for Battery Doorbells (2nd Gen) | 6EN...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 10. (Optional) If installing multiple wedge or...
Installing your Pan-Tilt Indoor Cam
...cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate...