Search Results
Showing results for préparé
Security camera setup guide
...Tap Continue . Step 5: Preparing your security camera for setup You will be guided through device-specific steps for preparing your camera for setup. For battery-powered security cameras: Follow the in-app instructions, such as making sure your device is charged, removing the protective film, and...
Video doorbell setup guide
...-only doorbells: Follow the step-by-step tutorial in the Ring app to prepare, install, and power on your doorbell. Step 6: Connecting to the doorbell for setup Press the setup button on your doorbell when prompted by the app. This creates a temporary wifi network for completing setup...
Hardwiring your battery-powered Ring doorbell
...In Adapter) will provide a trickle charge to the battery. Learn more about charging your doorbell’s battery. Step 2: Prepare the installation area Turn off power at the circuit breaker. 2. Remove any doorbell buttons and disconnect them from the doorbell wires...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...tool into the slot at the bottom of your doorbell. 11. Connect the USB-C cable and doorbell wiring to the back of your doorbell. NOTE : If connecting to an in-home chime, attach the doorbell wiring first. 12. Mount your doorbell by hooking it over the bracket and pushing down. 13...
Installing Solar Charger for battery-powered doorbells
...electrical wiring behind the plate. Do not drill into your home's electrical wiring. Installing on a wood surface Screw the Solar Charger directly into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide...
Installing battery-powered doorbells
...If using a Wedge Kit, Corner Kit , or mounting bracket with your device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit...
Installing your Hardwired Kit for Spotlight Cam
...it’s a bit narrower than your cable. If you’re routing the cable through the rear, insert it now. 4. Prepare the backbox If you haven’t already, push your power cable into the box through the grommet you cut...
Fixing setup issues
...5GHz Capability -Call out Your Ring device supports both 2.4GHz and 5GHz Wi-Fi bands. In Canada, all of Europe, UK, Australia, New Zealand and Japan, certain 5GHz channels (36-64) cannot be used by Ring devices to comply with Wi-Fi regulatory guidelines...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...or on the wall with the included screws, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 4. If installing multiple wedge or corner mounts, insert the included screws through both mounts to hold them together...
Ring Spotlight Cam Battery Installation
...device. Note : Both the red and green lights on top of the battery will illuminate while charging, but only the green light will be lit once fully charged...