Use Bird's Eye Zones for more relevant Motion Alerts

On select Ring devices, you can set up radar-enabled Bird's Eye Zones for more precise motion detection and more relevant Motion Alerts up to 30 feet from your Video Doorbell or Security Camera – so you can get notified about activity in your front yard, not the sidewalk.

Bird's Eye Zones are available with:

• Battery Doorbell Pro
• Wired Doorbell Pro (formerly Video Doorbell Pro 2)
• Floodlight Cam Wired Pro
• Spotlight Cam Pro
• Stick Up Cam Pro

To use Bird’s Eye Zones most effectively:

• Define your own custom Bird's Eye Zones (see steps below).
• Set

  Privacy Zones

  to block out areas in your camera's field of view.
• For cameras only: Tilt the back of your camera at a 45 to 60° angle. When viewed through the camera, the horizon should be level.
• Create

  Camera Motion Zones

  for ground view, making sure they cover the same area as your Bird’s Eye Zones, as motion outside a Camera Motion Zone will always be ignored.

How to set up Bird's Eye Zones

1. Open the Ring app to the main dashboard.

2. Tap more (•••) on the camera you want to access.

3. Tap your device's Settings.

4. Tap

   Motion Settings

   .
5. Tap

   Set up Zones

   on the map at the top or

   Bird's Eye Zones

   below it.
6. Tap

   Set up Feature

   .
7. Tap

   Continue

   .
8. When prompted by the app, enter the location where your camera or doorbell is installed.
9. Tap

   Continue

   .
10. Drag the map until the device icon is in the right position, marking the location of your device as accurately as you can.
11. Tap

    Continue

    .
12. Use the slider to rotate the map, marking the direction of your camera’s view.
13. Tap

    Continue

    .
14. For cameras only: For optimal motion detection, set the correct mounting height and tap

    Continue

    .
15. Tap Edit to adjust your zone so it only covers the area you want to monitor.
    • If you choose

      Skip for now,

      a default zone will be used.
16. Tap the zone and drag the circles to define a new area.
17. Rename the zone and tap

    Done

    .
18. Tap

    Continue

    .
19. Tap Start test to test your Bird's Eye Zones, then tap

    Confirm

    to complete setup.

Note: The radar technology that powers Bird's Eye Zones may be affected by weather changes, obstacles, reflections, wifi connectivity and other factors. In Motion Settings > Bird’s Eye Zones, you can update Detection Location, set Device Mounting Height (for cameras only), Test Bird's Eye Zones to ensure the map and your zones are properly aligned, and Reset Bird's Eye Zones to restore the feature to factory settings.

How to edit Bird's Eye Zones

1. Open the Ring app to the main dashboard.

2. Tap more (•••) on the camera you want to access.

3. Tap your device's Settings.

4. Tap

   Motion Settings

   .
5. Tap

   Edit Zones

   .
6. Tap a zone and drag the circles to define a new area.
7. Tap

   Done

   , then

   Save

   .

How to turn Bird's Eye Zones off

1. Open the Ring app to the main dashboard.

2. Tap more (•••) on the camera you want to access.

3. Tap your device's Settings.

4. Tap

   Motion Settings

   .
5. Tap

   Bird's Eye Zones

   .
6. Toggle

   Use Bird's Eye Zones

   off.