Search Results for Ring Help
Showing results for step-front
Setting up two-step verification for Ring
...Selecting Push Notification Approval To use Push Notification Approval in the Ring app, tap Sign in another way during the verification step. Push Notification Approval on ring.com appears as the default two-factor authentication (2FA) method, if you have a mobile device signed in to the...
Installing Pro Power Kit or Jumper Cable
...your doorbell’s “Front” wire Look for wires labeled “Front” and “Transformer.” Loosen the screw on “Front” and disconnect the wire. 6 Step 4 Connect the “Front” wire to the wire harness Use one of the wire clips to connect the “Front” wire to the black wire on the wire harness. Force the orange...
Installing Floodlight Cam Wired Plus and Pro
...metal mounting bracket Attach the included metal mounting bracket with the selected screws. Be sure to align the bracket so that the “FRONT” text faces outwards. Step 5: Install the plastic mounting plate Align the plastic mounting plate with the junction box, and feed the power wires through the...
Setting up and installing your Smart Lights Transformer
...Step Eight - Connect the wires Secure the light fixtures to the cable according to the fixture manufacturer's instructions. Step Nine - Plug the Transformer into the power outlet Your Transformer must be connected to a covered, weatherproof GFCI protected receptacle. If you...
Installing Outdoor Cam
...Step 3: Positioning your Outdoor Cam Position on a wall, ceiling, or eave Learn more about positioning your Outdoor Cam. Position on a table or shelf...
Installing Ring Smart Lighting Spotlight Battery
...Select Set Up a Device Open the Ring app to the main dashboard. Tap Set Up a Device at the bottom of the screen. Step Two - Scan the QR Code on Your Device Twist and pull off the front of the light. Press the buttons on the top and bottom of the battery compartment to remove the lid. Use your...
Wiring diagrams for wired doorbells
...terminal on any other internal doorbell chimes (C) in your home. The Pro Power Kit wires (D) connect to the TRANS and FRONT terminal screws on your internal doorbell chime (C). Steps for wiring: Connect both wires from your original doorbell to your Ring doorbell (A...
Lennar Homeowner Support Guide
...the front of the doorbell for 10 seconds. A spinning white light on the front of the device indicates that the doorbell is now in Setup Mode. Next, open the Ring app and select Set Up a Device to get started with step-by-step installation instructions. For more installation help, refer to the user...
Installing Wired Doorbell Plus
...to or bypassing an in-home chime, follow our guide for installing your Pro Power Kit. You do not need to follow these steps if you are using a Plug-In Adapter. Step 4: Uninstall your existing doorbell button Remove your doorbell from the wall and disconnect the wires. Make sure they don’t...
Installing Video Doorbell Elite
...the Ethernet cable into the Ethernet port on the back of the doorbell. When connected to power, the front light on the doorbell will begin spinning, indicating that the device is in setup mode. Step 4: Connecting the doorbell to an in-home doorbell chime (optional) Wiring Ring Elite to an existing...