Search Results for Ring Help
Showing results for install
Setting up and installing your Smart Lights Transformer
...Be sure to install and set up your Bridge before installing and setting up your Smart Lights. You will need to have a Ring Bridge installed and set up in order to connect your Smart Lights to the Ring App and the rest of your...
Installing Spotlight Cam Plus and Pro
...6: Install the mounting plate WARNING! Only use the included mounting screws when securing the mounting plate. CAUTION! DO NOT drill into your home’s electrical wiring. Choosing mounting plate direction If installing on a wall: Place the plate with the UP arrow pointing up. If installing on an...
Installing Outdoor Cam Plus Battery
...Usa la placa de montaje como guía para marcar orificios de tornillos en la pared. 3. Install the mounting plate with the UP arrow pointing up. / Installer la plaque de montage avec la flèche orientée vers le haut. / Instala la placa de montaje con la flecha apuntando...
Installing Battery Doorbell Pro (2nd Gen)
...using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or...
Installing Access Controller Pro 2
...for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider...
Installing the Pan-Tilt Mount for Outdoor Cam
...power adapter directly into the Pan-Tilt Mount, not the . Step 5: Mount on a wall 1. Install the mounting plate. If installing on a wood surface: Screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface: Mark four screw holes using the...
Setting up and installing your Ring Alarm Base Station
...Installing your Base Station You can install your Base Station almost anywhere. Place it on a flat surface or mount it on a wall. Screws and anchors are not included...
Installing Ring Sump Pump Monitor
...protective film. 2. Download the Ring app. 3. Scan the QR code on your device. 4. Follow in-app setup. Installation 1. Choose a location near leak-prone, hard-to-reach areas. 2. (Optional) Install the mounting bracket on the floor or wall with the included screws or adhesive backing...
Installing Wired Doorbell Pro (3rd Gen) PoE
...a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 7. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. 8. Install the mounting bracket on your mount or directly over the spacer with the included screws. 9...
Installing Ring Car Alarm
...1. Remove the protective wrap. . 2. Download the Ring app. 3. Follow app setup....