Search Results for Ring Help
Showing results for mount
Installing and using Panic Button (1st Gen)
...mount it on a wall. Keep your Panic Button out of reach of small children and pets. Place or mount your Panic Button somewhere it won’t be triggered by accident. Suggested locations for placing or mounting your Panic Button On the nightstand in your bedroom In the bathroom, in case there is a fall...
Installing Ring Candy Cam
...at the bottom of the base. 5. Route the cable through the mount arm. 6. Attach the mount arm onto the base. Candy Cam | 3 7. Tighten the tapping screws included with your camera to secure. 8. Slide the mounting plate at the bottom of the camera mount in the direction opposite to the UP arrow to...
Installing your Video Doorbell Wired
...on your wall. 7891011 Screw in your Ring Doorbell. Mount your Ring Doorbell with the two included mounting screws. If you ran the wire through your wall, be sure to feed any excess wiring into the wall first. 3/16" Security screw 1" Mounting screw DO NOT USE any screw other than the included...
Remounting Outdoor Cams and Stick Up Cams to fix rotated view
...below. Wall mount at 1:25 Ceiling mount at 1:40 More mounting options If you need more mounting positions or angles, try a flexible mount that will help you get your Stick Up Cam (2nd Gen) and correctly mounted on the ceiling or wall...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...the middle rubber cap on the back of your camera. 5. Attach the camera mount to the back of your camera with its screw. 6. Plug the power cable in until the indicator line disappears. 7. Secure your camera to the mounting plate by sliding until you feel a click. 8...
Proper Positioning for Your Stick Up Cam (2nd Gen), Wired
...jolts or shakes from people bumping into it, which can change the view angle of the camera. Try mounting the camera in a corner of the room to get maximum coverage of the space. Don't mount your camera directly across from a window, especially one where the rising or setting sun might create...
Installing Floodlight Cam Wired Plus and Pro
...plate with the junction box, and feed the power wires through the opening. Note: If attached to the camera, pull gently to release the plastic mounting plate from the device. If you are installing the camera on a wall, feed the wires through the mounting plate with the UP arrow pointing up. If...
Installing Stick Up Cam Pro
...2. Slide the mounting plate off of the camera mount. 3. Position the mounting plate. If mounting on a wall , the UP arrow should point up. If mounting on a ceiling, eave, or overhang , the UP arrow should point away from...
Installing Wedge Kit for Wired Doorbell Pro (3rd Gen)
...multiple wedge or corner mounts, insert the included screws through both mounts to hold them together. NOTE: We do not recommend using more than two. 5. Attach your doorbell’s mounting bracket over the mount. 6. Refer to your doorbell setup guide to complete setup...
Installing Stick Up Cam (2nd Gen) for Battery Use
...the camera is mounted right side up. Push the rubber pad into the bottom of the base. Drive the Screws. Hold the circular part of the base against your wall or ceiling, rubber side down. If you're mounting Stick Up Cam on a wall, use the integrated level to ensure it's straight. Mount it with the...