Search Results
Showing results for battery-from
Safety and compliance information for Ring Contact Sensor (1st Generation)
...all of the batteries out of the reach of children. Do not open, disassemble, puncture, cut, bend, shred or heat the batteries and do not allow metal objects to touch the battery terminals on the device as they can become hot and cause burns. Remove all batteries if they are worn out or before...
Outdoor Siren power sources
...3 D Batteries (included) The Outdoor Siren comes with 3 D batteries. Installation: During setup, the Ring app will prompt you to pull the battery tab. Ring Quick Release Battery Pack (sold separately) Can be manually recharged or charged...
Ring Alarm Z-Wave technical information
...type of notification turned off 0xFF: This type of notification turned on Battery Level A level of 0x64 indicates that battery is new. A level of 0x63 indicates the battery is normal/OK but not new. A level of 0x00 indicates that the battery should be changed “soon.” A...
Understanding doorbell light patterns
...doorbell is idle. This pattern only applies for battery-powered video doorbells that are not hardwired. Blue circle light flashing slowly: Boot (power up) The video doorbell is powering up. This pattern only applies to Video Doorbell Wired and Battery Video Doorbell Plus. White light filling circle...
Troubleshooting power mode
...Up Cam Pro Things to check If you are using only a battery or Solar Panel to power your device: To ensure your battery doesn’t drain too fast, make sure your device is in Battery Mode. In the Ring app: Open the Ring app to the main dashboard...
Ring software release notes and history
...11 December, 2025 Devices: Outdoor Cam (formerly Stick Up Cam (3rd Gen)), Spotlight Cam Plus, Battery Video Doorbell Plus Version: cam-1.28.10800 or higher Size: Up to 29.04 MB 15 December, 2025 Devices: Stick Up Cam, Spotlight Cam Version: cam-17...
Outdoor Cam Plus
...Works With Alexa • 1-year limited warranty Box Includes Battery : • Outdoor Cam Plus Battery • Quick Release Battery Pack • Micro USB Charging Cable • Installation Hardware • Setup Guide • Warranty and Safety Document • Security Sticker Plug-In: • Outdoor Cam...
ProductSafety and compliance information for Ring Motion Detector (1st Generation)
...all of the batteries out of the reach of children. Do not open, disassemble, puncture, cut, bend, shred or heat the batteries and do not allow metal objects to touch the battery terminals on the device as they can become hot and cause burns. Remove all batteries if they are worn out or before...
Setting up and using your Ring Alarm Motion Detector
...cover (which should still be mounted on the wall). Note: Make sure that you always insert replacement batteries correctly, matching the + (positive) and - (negative) polarity on the battery with the markings on the device: Motion Detector (1st Generation) Motion Detector (2nd Generation...
Installing Stick Up Cam Pro
...and discard the plastic battery insulator. 2. Charge the battery. Connect the charging cable to the battery's charging port. While charging, your battery displays two coloured lights, a solid green and an amber light. Charge the battery until only the green light remains lit. 3. Insert the charged...