Search Results
Showing results for must
Safety and compliance information for Ring Plug-In Adapter (2nd Generation)
...If you are connecting to Outdoor Siren, you must correctly connect the positive (+) and negative (-) sides. The negative cable can be identified by a ridge running the length of the cable. If you...
Installing PoE+ Adapter with Mount
...camera’s decorative cover by sliding until you hear a click to secure. 23. Adjust your camera’s position, if necessary. Outdoor Cam Pro | 10 EN 24. Must apply proper silicone or caulk around the junction box knockouts, between the junction box and junction box cover mount, and between the junction...
Installing Outdoor Cam Pro PoE
...camera’s decorative cover by sliding until you hear a click to secure. 23. Adjust your camera’s position, if necessary. Outdoor Cam Pro | 10 EN 24. Must apply proper silicone or caulk around the junction box knockouts, between the junction box and junction box cover mount, and between the junction...
Using a Wedge Kit or Corner Kit with your doorbell
...Corner Kit mount with a Solar Charger to avoid shadows and maintain optimal sunlight. Installing your Wedge or Corner Kit The Wedge or Corner Kit must be installed before installing your doorbell. View or download the installation guide for your doorbell to learn how to properly install your...
Setting up Ring Cameras to record when Alarm is triggered
...On the “Add Linked Devices” page, tap the devices you wish to begin recording video when an alarm goes off or begins entry delay. Note: Live View must be enabled in order to set a device for simultaneous recording. Turning Live View off on a device will supersede an order for the simultaneous...
Setting up two-step verification for Ring
...Note: You can only use the enrolled device to sign in. If you get a new device, you must delete the authenticator app from the old device before setting it up on the new one. To download an authenticator app: Use your preferred...
Outdoor Siren power sources
...power options to choose from for your convenience, and you can set them up in any order. If you plan to use the Dusk to Dawn light setting, you must have more than one power source. Before you begin, make sure the battery cover is off. When you finish connecting your power sources, replace the...
Ring Plug-In Adapter (2nd Generation)
...wires to your Ring Doorbell. Attach the power wires to the terminals on the rear of your Ring Doorbell. If you are connecting to Outdoor Siren, you must correctly connect the positive (+) and negative (-) sides. The negative cable can be identified by a ridge running the length of the cable. If you...
Troubleshooting your Ring Intercom devices
...have technical limitations that stop the immediate use of the Remote Unlock feature. On ring-to-open systems, the call button for your apartment must be pressed before the building entrance can be unlocked remotely. If you are experiencing this issue, and would like to confirm whether your...
Using Geofence
...Tap Finish and Save . Tap Go to Settings to allow location permissions always. Note: For the Geofence feature to work, the location permissions must be set to “always on.” Adjusting your Geofence Tap the menu (☰) . Tap Settings . Tap Modes and Automations . Tap on the map. Drag the Geofence...