Ring Plug-In Adapter (2nd Generation)

The Ring Plug-In Adapter (2nd Generation) is designed to help you keep your battery-powered Ring Video Doorbells charged, via the mains. It can also be used to power hardwired devices, instead of an existing doorbell system.

You can find a list of devices compatible with the Plug-In Adapter (2nd Generation) here.

How to install your doorbell with a Plug-In Adapter

1. Choose a socket.

• Select a power outlet near the door where you plan to install your Ring Video Doorbell. Don't plug the power adapter in yet.

2. Run the cable.

• Run the cable down from the outlet to your molding and then choose a path to your Video Doorbell.
• Secure the cable to the wall with cable clips.
  • The cable can be run through your walls, or through a door or window if desired.
  • Always be careful of existing electrical wiring and pipes when drilling through walls.

3. Attach the wires.

• Attach the power cables to the terminals on the rear of your Ring Video Doorbell.

• If you are connecting a Video Doorbell, it doesn't matter which cable is connected to which terminal. The device will work with either cable connected to either terminal.
• If you are connecting an Outdoor Siren, you must correctly connect the positive (+) and negative (-) sides. The negative cable can be identified by a ridge running the length of the cable.
  • Click here for the Ring Alarm Outdoor Siren Quick Start Guide.

4. Plug in the power adapter.

• It may take a moment for your device to power on. You’ll know it’s ready when the LED indicator on your Video Doorbell lights up.