Search Results
Showing results for i-anchor
Installing and using Ring Alarm Glass Break Sensor
...attached. • Ceiling. Use the included screws and anchors. First remove the back cover and set the sensor aside. Screw the back cover to the ceiling. To mount the sensor, twist it onto the back cover, and secure it in place. Screws: 2x 3x21 mm. Anchors: 2x 5x25 mm. • Shelf...
Installing Solar Charger (USB-C) for Battery Doorbells
...bracket. 3. Install your solar charger. On stucco, brick, or concrete, use a 0.25 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Optional: Install a wedge or corner kit using its included screws. 5. Install your doorbell’s mounting bracket. 6...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...mark screw holes. 5. Install junction box. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 6. Cover screws with rubber caps. Optional: Use the built-in hooks to hold the S-hook. 7. Connect wires. Fasten earth screw with a minimum...
Setting up and installing your Ring Alarm Base Station
...Installing your Base Station You can install your Base Station almost anywhere. Place it on a flat surface or mount it on a wall. Screws and anchors are not included. Choose the right location: For connectivity: Place it where wifi reception is strong...
Ring Alarm Z-Wave technical information
...3. Using the provided double-sided tape, peel the backing and attach the sensor to the mounting location. Screws and anchors are also provided for more permanent mounting. Metal strap ties can be used but are not provided. 4. Follow the same steps for the companion...
Troubleshooting your Ring Alarm Glass Break Sensor
...added using the Ring app. How to troubleshoot a Glass Break Sensor stuck in 'Tampered' status Make sure you use the included screws (3x21mm) and anchors (5x25mm) to mount the Glass Break Sensor. Check that the mounting bracket isn't warped, bent or damaged. If the mounting bracket appears slightly...
Installing and using Ring Alarm Outdoor Siren
...work; permits and/or professional installation may be required by law. Tools needed: Mounting hardware included with the Outdoor Siren (screws, anchors, and mounting bracket) Ladder or sturdy platform Power drill with 6 mm drill bit compatible with your exterior wall...
Solar Panels for battery doorbells
...If you are mounting to brick, concrete or stucco: Mark the holes where you wish to mount the Solar Panel. Drill holes for the anchors. Insert the anchors. Use the screws to secure the mount...
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...marked the position of the mounting holes. If you are mounting the Ring Video Doorbell 3 on brick, concrete, or stucco, put the included plastic anchors into the holes. You may need to use a hammer to get the anchors in. If you are using the included optional adaptor mounting plate on wood or...
Installing Spotlight Cam Pro (2nd Gen) PoE
...wall or ceiling with the included screws. On stucco, brick, or concrete, use a 6mm (1/4 inch) masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included rubber caps. 4. Disassemble the cable gland by unscrewing the cap from the body. NOTE: If the...