Search Results
Showing results for ex-light
Door View Cam knock detection information
...If knock Detection doesn't work as you'd expect, try a different knock sensitivity setting in your Ring app. Need to test again? Just wait for the light to stop spinning and knock a few seconds later...
Ring Spotlight Cam Battery Installation
...installing your Spotlight Cam, it's important to set it up in your Ring app. Learn how to do the in-app setup. White light flashing? If the light on the bottom of your Spotlight Cam flashes after setup, it’s updating its internal software. The update process can take up to a few minutes. The...
Outdoor Siren power sources
...battery and hardwired power options to choose from for your convenience, and you can set them up in any order. If you plan to use the Dusk to Dawn light setting, you must have more than one power source. Before you begin, make sure the battery cover is off. When you finish connecting your power...
Connecting external lights to your Spotlight Cam Mount
...wire them according to the diagram below. Note : Total power draw of connected lights must not exceed 150 watts. Controlling external lights Any ordinary light connected to your Spotlight Cam Mount will turn on whenever the Spotlight Cam itself turns on in reaction to detected motion...
Setting up and using your Ring Solar Security Sign
...Add the top, and turn on the switch. Your Solar Security Sign only lights up at night. Your Solar Security sign detects changes in light to know when to light up. If it's light out when you first switch it on, it won't illuminate until it gets dark. Keeping your...
Setting up your replacement Ring Alarm Base Station
...of your Base Station. Once your Base Station connects to the internet, it might take a few minutes to update its software. Look for a solid blue light ring on the Base Station. Then continue to the next step. View or download the user manual for more information about setting up your Base Station...
Security camera setup guide
...until setup is complete. 1. Press the setup button on the device. The light on the camera will begin to flash. The setup button is located either inside the removable cover on the bottom or on top of the camera. 2. Tap Light is flashing in the app. iOS: When the app asks to join the Ring wifi...
Bypass a Contact Sensor with Ring Alarm Quick Exit
...as tampered, opened, or low on battery. You have 30 seconds to open the door before the Sensor resets to Armed Mode, at which point the green light will stop blinking. Your system will reset to being fully armed as soon as you close the door again. If you have left and need to go back inside...
Setting up and installing your Ring Alarm Base Station
...Press the pairing button on the back of your Base Station. When the blue LED light on top starts spinning, tap Find my Base Station in the Ring app. Connecting your Base Station to the internet Your Base Station connects to the...
Installing your Stick Up Cam Battery (2nd Gen)
...using the provided orange cable or any other micro USB cable you have handy. While charging, your battery displays two coloured lights, a solid green and an amber light. Charge the battery until only the green light remains lit. Remove the battery cover on your Stick Up Cam by twisting it...