Search Results
Showing results for attach
Installing your Pan-Tilt Indoor Cam
...power cable. Anchor the power cable to the wall or ceiling with the included cable clip. Using the privacy cover. Removing the privacy cover. Attaching the privacy cover...
Ring device manuals
...Secure the cable to the wall with the provided cable clips. 2. Attach the wires to your Ring Doorbell. Attach the power wires to the terminals on the rear of your Ring Doorbell. If you are connecting to Outdoor Siren, you must correctly connect the...
Installing Floodlight Cam Wired Plus and Pro
...existing floodlight With power off at the fuse box, remove the existing floodlight from the wall and disconnect the wires. If there is a bracket attached to the wall, remove that as well. Remove the plastic mounting plate from the light fixture. Push gently on the threaded posts visible on the...
Ring Alarm Z-Wave technical information
...3. Using the provided double-sided tape, peel the backing and attach the sensor to the mounting location. Screws and anchors are also provided for more permanent mounting. Metal strap ties can be used but are not...
Safety and compliance information for Gutter Mount
...Voor het zonnepaneel / For Solar Panel / För solcellspanel / Aurinkopaneeli / Til Solar Panel Attach the Ring Solar Panel (sold separately). / Attach the Ring Solar Panel (sold separately). / Fixez le panneau solaire Ring (vendu séparément). / Befestigen Sie das Ring Solarpanel (separat...
Installing Wired Video Doorbell (2nd Gen)
...down. 6. Connect the power cable to your doorbell’s wire terminals, ensuring the terminal wires are not in contact with each other. NOTE: You can attach any wire to any terminal. Wired Doorbell (2nd Gen) | 5EN 8. Tighten the security screw...
Installing your Hardwired Kit for Spotlight Cam Wired/Mount
...power off at the consumer unit, remove your existing Spotlight Cam Wired from the electrical box and disconnect the wires. If there is a bracket attached to your electrical box, remove that as well. 3. Cut the grommet The included backbox has two cable inlets with rubber grommets. Choose the inlet...
Hardwired Kit for Spotlight Cam Information
...Wiring harness and mounting nut: Used to attach your Spotlight Cam to your chosen weatherproof box cover and connect it to your household wiring. Security Screw: Used to secure your Spotlight...
Installing your Indoor Cam (2nd Gen)
...التركيب على الحائط/السقف Indoor Cam | 4 Using the privacy cover. / استخدام غطاء الخصوصية.Removing the privacy cover. / إزالة غطاء الخصوصية. Attaching the privacy cover. / تركيب غطاء الخصوصية...
Troubleshooting your Ring Alarm Glass Break Sensor
...that the Glass Break Sensor’s lock icon lines up with the line on the mounting bracket. Remove the cover and check whether the tamper switch is attached. If tamper switch is missing, please contact Ring Customer Support. On the mounting bracket, ensure the plastic tab that pushes down on the...