Search Results
Showing results for screws
Installing Outdoor Cam Pro PoE
...Attach the metal crossbar with the screws included with your adapter, starting with the closed screw hole. Close the junction box with the cover mount. Tighten the centre screw to secure the junction box cover mount in place. Cover the centre screw hole...
Installing Video Doorbell Elite
...the bracket with the top leaning toward you. Insert two of the included screws into the holes on the bracket. Use a screwdriver to tighten the screws and secure the device. Step 6: Setting up the doorbell in the Ring app Learn more about setting up your doorbell in the Ring app...
Installing Wired Video Doorbell (2nd Gen)
...7. Use the mounting bracket as a guide to mark screw holes on the wall. 8. Install the mounting bracket directly over your doorbell wiring with the included screws. Note: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for...
Hardwired Kit for Spotlight Cam Information
...Spotlight Cam contains the following: Screwdriver and Phillips bit: Used to install the box cover and tighten the security screw. Bag of screws and washers: Use four screws when mounting to a round junction box. WAGO connectors: Used to secure and protect wire connections. Round weatherproof box...
Outdoor Siren power sources
...cover is off. When you finish connecting your power sources, replace the back cover and tighten the screws. Then attach the Outdoor Siren to the mounting bracket. Tighten the security screw on the bottom of the bracket. Use these directions for each power source...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...4. Attach the Wedge or Corner Kit using the two included bracket screws. Important note : If installing on a Wedge Kit, insert screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit. 5...
Upgrading from Video Doorbell Elite to Wired Video Doorbell Elite (2nd Gen)
...screwdriver bit, a Torx T6 screwdriver can be used to unlock the security screw. Remove the screw and faceplate. Step 2: Removing the doorbell from the bracket Use a PH2 screwdriver to remove the screws from the holes on the bracket. Gently pull the doorbell and wires from the wall. Step 3...
Installing Battery Doorbell Pro (2nd Gen)
...with wire nuts. 5. Install the mounting bracket on your mount or directly over the doorbell wiring with the included screws. Battery Doorbell Pro | 11EN 10. Tighten the security screw. 9. Remove the battery to identify the security screw. 8. Mount your doorbell by hooking it over the bracket...
Charging your Ring Security Camera batteries
...Use the included screwdriver to remove the security screw prior to removing the cover. View the installation article for details . For all other Spotlight Cam variations: Press the release button under...
Installing PoE+ Adapter with Mount
...the centre of the junction box. 10. Attach the metal crossbar with the included screws, starting with the closed screw hole. 11. Close the junction box with the junction box cover mount. 12. Tighten the centre screw to secure the junction box cover mount in place. 13. Cover the centre screw hole...