Search Results
Showing results for i-anchor
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing Solar Charger for battery-powered doorbells
...through the Solar Charger into the wall anchors. Step 3: Mounting the Solar Charger Screw your Ring Solar Charger onto the wall or into the wall anchors. Then, install any Wedge Kits, Corner Kits, or mounting brackets onto the Solar Charger. Step 4: Connecting the doorbell to the Solar Charger For...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 10...
Installing Stick Up Cam Pro
...Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. 1. Screw the mount into the back of the camera. 2. Slide the camera with its mount onto the mounting plate. Tighten the security screw on the...
Installing Solar Panel for Battery Doorbells
...On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. 3. Feed the power cable through the doorbell spacer, then secure it in place with the clips on the back. NOTE: Ensure the cable can reach your...
Installing Ring Video Doorbell Wired
...from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11. Connect the doorbell wires Loop one doorbell wire around each of the...
Installing Battery Doorbell (2nd Gen)
...Optional) On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 5. Connect the doorbell wiring to your doorbell’s wire terminals. 6. Mount your doorbell by hooking it over the bracket. NOTE : Ensure the...
Installing Outdoor Cam Plus Plug-In
...Anchor the power cable to the wall or ceiling with the included cable clips. (Optional) Secure the power adapter with the included anchors and screws. Ceiling installation 1. Slide the mounting plate in the direction...
Installing Wired Video Doorbell (2nd Gen)
...bracket with the included screws.NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 7. Mount your doorbell by hooking it over the bracket and pushing down. 6. Connect the power cable to your doorbell’s wire terminals, ensuring...
Installing Spotlight Cam (2nd Generation)
...4. Anchor the power cable to the wall or ceiling with the included cable clips. 5. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors...