Search Results
Showing results for attach
Installing Solar Charger for battery-powered doorbells
...Tighten the terminal screws. Fit your doorbell into the Solar Charger and secure with screws. Tuck the retractable wire into the Solar Charger. Attach the faceplate. For doorbells with a built-in battery: Secure the mounting bracket to the Solar Charger with screws. Connect the micro USB cable to...
Installing Floodlight Cam Wired Pro (2nd Gen)
...9. Route the wires from your camera fixture along the right side of the mounting plate. 10. Slide the camera fixture onto the mounting plate and attach using the included hex cap nuts. 11. Rotate the lights out of the way, then your rotate camera clockwise. 12. Remove the shank from the included...
Installing Outdoor Cam Plus Plug-In
...on the back of your camera and use it to plug the bottom. 7. Attach the camera mount to the back of your camera with its screw. 8. Plug in the power cable. Make sure the power cable is fully inserted. 9. Clasp the camera mount and attach your camera to the mounting plate by sliding until you feel a...
Installing PoE+ Adapter with Mount
...Unscrew to detach the camera mount. 5. Remove the middle rubber cap on the back of your camera. 6. Attach the camera mount to the back of your camera with its screw. 7. Plug the included USB-C cable into your camera until the indicator line disappears...
Installing Indoor Cam Plus
...6. Connect the power cable to the power adapter and plug it into an outlet. Attaching the lens cover 1. Align the dotted line on your lens cover with the dotted line on top of your camera. 2. Push the cover onto your camera until...
Installing PoE+ Converter Mount
...camera locks in place. 7. Tighten the security screw. 8. Install your camera’s decorative cover by sliding until you hear a click to secure. 9. Attach the decorative cover. If installing Outdoor Cam Plus, use decorative cover 1. If installing Outdoor Cam Pro, use decorative cover 2...
Positioning Alarm Contact Sensors on different types of doors, windows and trim
...Ring Alarm system using the Ring app 1 or Keypad. Learn how to arm and disarm Ring Alarm . 2. Slide the sensor off of its mounting bracket. 3. Attach the mounting bracket to the riser. Make sure it snaps in securely. 4...
Installing Stake Mount for Solar Panels and Cameras
...3. Connect the center pole. 4. Connect the camera mount pole. Solar Panel 1. Attach the solar panel mount. 2. Slide your solar panel into place and wind the cable underneath, leaving enough length to connect to your camera...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...5. Attach the camera mount to the back of your camera with its screw. 6. Secure your camera to the mounting plate by sliding until you feel a click. NOTE...
Hardwiring your battery-powered Ring doorbell
...wires Loop one wire around each of the screw terminals on the rear of your Ring doorbell. If your doorbell wires are too short, you can attach the included wire extenders using the included wire nuts. Using Plug-In Adapter Insert the plug-in adapter connectors underneath the terminal...