Search Results
Showing results for corner-
Safety and compliance information for Corner Kit
...OR OTHER INJURY OR DAMAGE. WARNING: Small parts contained in your device and its accessories may present a choking hazard to small children. Your Corner Kit should only be used in accordance with the instructions and intended purpose. Using this acces- sory in any way other than its intended...
Using a Wedge Kit or Corner Kit with your doorbell
...Doorbell mounted in a corner with limited visibility Using a Corner Kit with a doorbell mounted in a corner Combining Wedge and Corner Kits You can combine Wedge and Corner Kits to adjust the position of all Ring doorbells. We recommend using one of each and stacking the Wedge Kit on...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...view. To skip this step, click here (set anchor) To install the Corner Mount: 1. Mark two mounting holes on your wall through the slots on your Corner Mount (fig 1) If you are replacing a Ring doorbell, align the two small screw holes with two of the existing holes in your wall (fig 2). 2...
Positioning video doorbells and security cameras
...use a Wedge Kit to adjust the vertical angle. If you are installing your doorbell on a corner or adjacent wall, you can use a Corner Kit to adjust the horizontal angle. Learn more about using a Wedge or Corner Kit...
Setting up and using your Ring Alarm Motion Detector
...Base Station. The image below shows the coverage area for Motion Detectors when placed on the wall vs the corner of the room. As you can see, the corner provides more complete coverage of the area. We recommend that you test your Motion Detector after installation to ensure that you've selected the...
Installing battery-powered doorbells
...included: Mounting screws (A) Mounting anchors (A) Security screw (B) Additionally, some devices come with: Wedge Kit or Corner Kit Short bracket screws (C) Medium corner mounting screws (C) Additional mounting anchors (C) Wire nuts (D) Wire extenders (D) Tools needed: Phillips head screwdriver...
Ring Alarm Keypad (1st Generation) lights and buttons explained
...subscription and have signed up for Alarm Calls, 1 the monitoring service will call emergency contacts Learn more about Alarm Calls Red, four corners blinking A command failed to send or was rejected. Most often occurs when an incorrect PIN is entered. Yellow, four corners blink three times One...
Installing Battery Doorbell Pro (2nd Gen)
...Optional) If using a corner mount, install the mount on the mounting surface using the bottom holes in the top and bottom sections, ensuring it is facing in your desired...
Using the Ring app: features and functions
...more about Ring subscriptions . Main menu The main menu is where you access the Ring app's other functions. Tap the menu (≡) in the upper left corner. To return to the main screen, tap Dashboard . These functions can be accessed from the main menu: Locations : Tap the Location name in the top...
Install No-Drill Mount for battery doorbells
...If installing on a Wedge Kit, insert a screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit. 5. Remove your doorbell’s faceplate. 6. Attach your doorbell using the four included mounting screws. 7. Refer to your doorbell setup guide...