Setting up your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2) in the Ring app

Setting up your Ring Video Doorbell Pro 2 in the Ring app is a simple process. Scroll down for a step-by-step guide.

1. Download the Ring app

To download the Ring app:

  • On your mobile device, go to the
    (for iOS devices) or the
    (for Android devices).
  • Search for “Ring.”
  • Download and install the Ring app on your mobile device.

Or visit ring.com/app on your mobile device

2. Create or login to your account

If this is your first Ring product, you will be asked to set up an account.To set up an account:

  • Open the Ring app.
  • Select “Create Account.”
  • Follow the in-app instructions to create a new account.

If you already have another Ring device installed, simply open the Ring app.

3. Tap “Set up a Device’

Tap “Set Up a Device” then select “Doorbells”

4. Scan the QR code on your Ring device

You can scan the QR code on your Ring device or product packaging via the Ring app:

1. Tap I’m Ready to Scan

2. Point your smartphone camera at the QR code on your Ring device or product packaging

3. Centre the code in the camera's view in the bottom half of the screen

4. When the code is recognised, you will see a green square and a pop-up with your device image

If you experience issues when scanning the QR code:

  • Move your camera closer or further from the QR code to help it foc
  • Once your camera finds focus, hold it steady for a few seconds
  • If your camera won’t focus, clean your camera lens, move to a well-lit area, and try again

If you continue to experience issues:

1. Tap Other Options below the scanner

2. Tap Can’t Scan the QR code

3. Tap Enter code manually (this corresponds to PIN code digits underneath the QR code)

4. Find your device in the list

5. Enter your five digit PIN which can be found below the QR code

5. Specify your location

If this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address.Enter your address information into the app, then confirm it.If you have established a location previously, you can select it from the list of your locations.

Note: Without a specific location, certain features of your Video Doorbell will not work properly.

Click here to learn more about Ring devices and your address.

6. Name your device

Select a specific name for your Video Doorbell Pro 2 to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list.

7. Follow the physical installation steps in the Ring app

Follow the steps in the Ring app to physically install your Video Doorbell. If you have already completed these steps, tap on “I’ve Already Installed It”.If you have an existing internal doorbell, select whether it is a mechanical or digital doorbell, or select “None” if you are installing your Video Doorbell without connecting to an internal doorbell.

8. Put your Video Doorbell Pro 2 into setup mode

If you have never set up your Video Doorbell Pro 2 before, it will automatically enter setup mode. Otherwise, press and release the small button on the side of your Video Doorbell Pro 2. When there is a spinning white light on the front of your Video Doorbell, tap the “Continue” button in your Ring app.

9. Connect to your Ring device

iOS: Tap Join when the Ring app asks to join the Ring wifi network.

Android: Your device should automatically connect to the Ring wifi network.If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning in step four, please follow the steps below:

Press the home button on your phone to leave the Ring app.

  • Navigate to
    Settings
    , then tap
    Wifi
    • On Android, you may need to navigate to
      Connection
      then
      Wifi
  • Select the Ring wifi network from the list of available networks. The network will appear as either:
    • “Ring-” followed by the last six digits of the MAC ID.
    • “Ring Setup” followed by the last two digits of the MAC ID.
  • Once connected, close your “Settings” app and return to the Ring app.

10. Connect your Video Doorbell Pro 2 to your wifi

  • Select your wifi network
    • If you have more than one wifi network, select the network closest to where you have installed your Video Doorbell Pro 2
  • Enter your wifi password and press “Continue”

Note: After connecting to your wifi network, your Video Doorbell may update its internal software. While performing an update, the light on the front of your device will flash white. Once the light stops flashing, you know the update is complete and you can continue the setup. Please do not attempt to ring the doorbell at this time, as it will further delay the update.

11. Test your device

Once your Video Doorbell has completed its update and setup, push the front button to complete a test call. This will initiate your software and ensure your doorbell is ready to function.

Last updated 2 months ago
English (GB)Change
©2024 Ring LLC or its affiliates
|
||