Search Results
Showing results for walls
Installing Pole and Wall Mount for Cameras and Solar Panels
...tighten until fully secured. Wall installation Use the drilling template for your mount as a guide to mark screw holes on the wall. Drilling template Print page at 100%. If credit card fits here, page size is accurate. 1. Attach the mount using the four included wall mount screws. On stucco, brick...
Installing Outdoor Cam Pro Plug-In
...Plug the power adapter into an outlet. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. 3. Install the...
Installing Outdoor Cam Plus Plug-In
...3. Tighten the security screw on the battery cover. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On...
Installing Outdoor Cam Pro PoE
...Wall installation FOR INDOOR USE ONLY Slide the mounting plate in the direction opposite to the UP arrow to remove. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. Install...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...the QR code on your device. 4. Choose a location near an outlet. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. 3. Install the...
Installing your Pan-Tilt Indoor Cam
...Place your camera on a level surface with 16.5 cm (6.5 inches) of space in every direction and plug in. Wall installation Use the mounting plate as a guide to mark screw holes on the wall with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow...
Installing Stick Up Cam
...Do not drill into your home's electrical wiring. If installing on a wood surface , screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24...
Installing Indoor Cam Plus
...Cam Plus | 4EN Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. NOTE: For an upward angle, swivel the base toward the back and tilt your camera up accordingly. 2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the...
Installing PoE+ Adapter with Mount
...if necessary. 4. Plug the other end of the USB-C cable in to your camera until the indicator line disappears. Wall installation FOR INDOOR USE ONLY 1. Install the adapter on the wall with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included...
Installing Floodlight Cam Wired Pro (2nd Gen)
...to a dimmer switch or timer. Floodlight Cam Pro (2nd Gen) | 3EN Wall installation 1. Remove your existing floodlight and disconnect the wires. 2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 3. Feed the wires through the mounting plate. 4...