Search Results
Showing results for oranger
Physically installing your Stick Up Cam Elite
...Cam Elite in the Ring app. 1. Slide off the bottom cover The first step in installing your Stick Up Cam is sliding off the bottom cover. Use the orange Ring screwdriver included in your box to remove the security screw, then pull off the bottom cover. Once removed, it will reveal a USB port, an...
Installing Outdoor Cam Plus Battery
...Twist the battery cover counterclockwise to remove the battery and discard the orange battery insulator. / Drehen Sie die Akkuabdeckung gegen den Uhrzeigersinn, um den Akku zu entnehmen, und entsorgen Sie den orangefarbenen...
Installing your Hardwired Kit for Spotlight Cam
...wire clip to open. Line up the ends of each pair of wires side-by-side, and fully insert them into the holes in the clip. Then, just push the orange tabs down to close and secure the connection. The white wire on the harness is not used, so cap it with a wire clip as well. 7. Mount the backbox...
Installing your hardwired transformer kit
...home doorbell. Loosen the terminal screw for the wire labeled Front. Open the orange lever on the wire clip and insert this wire, snapping the orange lever down to secure the wire. The red wire supplied with your device should be on the other side of the wire clip...
Charging your Ring Intercom device battery
...Connect your micro-USB cable to the charging port in the battery. Note : You can use the orange micro-USB cable included in the box with your Intercom, or any micro-USB cable. Plug your micro-USB cable into any USB power source. Your battery...
The difference between the Pro Power Cable and Pro Power Kit v2 (for Ring Video Doorbell Pro)
...Loosen the terminal screw for the wire labeled Front. Open the orange lever on the wire clip and insert the wire, snapping the orange lever down to lock it in place. The red wire supplied with your device should be on the other side of the wire clip. Repeat for the transformer...
Physically installing your Stick Up Cam Wired
...Stick Up Cam Battery Step One: Slide off the bottom cover The first step in installing your Stick Up Cam is sliding off the bottom cover. Use the orange screwdriver included in your box to remove the security screw, then pull off the bottom cover. Once removed, it will reveal a USB port, an...
Floodlight Cam Installation Guide
...behind your Floodlight Cam. Align the mounting posts with the holes on Floodlight Cam and press together, securing the screw cap nuts with the orange Ring screwdriver handle. 11. Restore power After restoring power, the lights will turn on and your Floodlight Cam will begin speaking to you to...
Installing Ring Door View Cam
...Plug the battery into a USB port using the provided orange cable or any other USB cable. The battery is fully charged when just one LED is lit. Keep in mind that it can take a full 5 to 10 hours...
Ring Spotlight Cam Battery Installation
...Spotlight Cam. Step One - Charge the Battery Before installing your Spotlight Cam, the included battery needs to be charged by using the included orange USB cable. Please note that the amount of time it takes for the battery to charge will vary depending on whether the USB cable is plugged into a...