Search Results
Showing results for installable
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included...
Installing Stick Up Cam
...Up Cam includes a pre-installed base for placement on flat surfaces. Adjust the camera angle Rotate the base so its longer side faces forward, then tilt the camera downward. Step 4: Installing on a wall or ceiling To install on a ceiling, use the mount for Stick Up Cam. Install the mounting plate On...
Installing your Indoor Cam (1st Gen)
...Set up and install your Indoor Cam with this step-by-step guide, or view the installation guide video . Note that you should set up your Indoor Cam in the Ring app before physically installing it. 1. Set up your Indoor Cam Download the Ring app The...
Installing your Ring Indoor Cam (2nd Gen)
...Hardware included Tools needed For wall or ceiling installation: Choose a location. Warning: Ring Indoor Cam (2nd Gen) and its accessories are for indoor use only. Don’t expose your device to steam, extreme heat or cold. For example, do not install your device near any heat sources such as space...
Installing your Solar Panel (USB-C) (2nd Gen)
...This article outlines the step-by-step process to install your Solar Panel (USB-C) (2nd Gen). Choose an install location with the most direct sunlight. If you are in the Northern Hemisphere, direct your Solar Panel toward the south. If you are in the...
Installing a Solar Panel with your security camera
...Ring Solar Panel should be installed in a location where it will receive direct sunlight for a minimum of four to six hours a day. For instructions on installing your security camera, find your device in the installation guide library. Installation manual Solar Panel 1 32 23 54 4 8 10...
Installing Intercom Kit for Video Doorbells
...shock. Installation by a qualified electrician may be required in your area. Refer to your local laws and building regulations before performing electrical work; permits and/or professional installation may be required by law. Turn off power at the consumer unit before installing...
Installing your Pan-Tilt Indoor Cam
...with 16.5 cm (6.5 inches) of space in every direction and plug in. Wall installation Use the mounting plate as a guide to mark screw holes on the wall with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or...
Installing Outdoor Cam Pro Plug-In
...3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall...
Installing Solar Charger for battery-powered doorbells
...behind the plate. Do not drill into your home's electrical wiring. Installing on a wood surface Screw the Solar Charger directly into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide...