Search Results
Showing results for i-anchors
Installing a Solar Panel with your security camera
Installing the Solar Panel Hardware included: Mounting screws Mounting anchors Some models come with cable clips and anchors Tools needed: Phillips head screwdriver Drill with 6mm (1/4") bit Step 1: Mounting the Solar Panel Mount your Solar Panel to a wall or flat surface. To properly line up your Solar Panel, use the mounting arm as a template, and mark the screw holes on your chosen surface with a pencil. If you are mounting on brick, concrete, or stucco, use a 6 mm drill bit to drill holes where you marked the position of the mounting holes, and put the included plastic anchors into the holes. You might need to use a hammer to secure the anchors.
RecommendedInstalling Battery Doorbell Pro (2nd Gen)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. NOTE: We do not recommend...
Installing Battery Video Doorbell Plus (2nd Generation)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route the Ethernet cable through the slot...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...and star-shaped end for the security screw. Drill bit and anchors - Use a 6mm drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting screws - Use two to mount your Ring Doorbell...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing...
Installing Indoor Cam Plus
...plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. Indoor Cam Plus | 5EN 4. Plug the power cable into your camera. 5. Swivel your camera’s mount toward the back. 6. Secure your camera to the...
Installing Outdoor Cam Pro PoE
...the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into the adapter until the indicator line disappears. Plug the Ethernet cable...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Ceiling installation 1...
Installing Ring Video Doorbell Wired
...doorbell. 9. Mark the screw holes Using your doorbell as a template, mark the location of the two mounting holes on your wall. 10. Install the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall...