Search Results
Showing results for drill
Installing No-Drill Mount for Ring battery doorbells
...You can use a No-Drill Mount for Ring battery doorbells if you are a renter or simply don’t want to drill holes in your walls. The No-Drill Mount uses double-sided adhesive to attach the plate to your wall so you can securely screw your Ring video doorbell directly...
Safety and compliance information for No-Drill Mount
...device in elevated locations, use precautions to ensure that the device does not fall and harm bystanders. PRODUCT SPECIFICATIONS Device name: No-Drill Mount RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...You can use a No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) if you are a renter or simply do not want to drill holes in your walls. The No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) uses double-sided adhesive to attach the plate to your wall so you can...
Installing Stick Up Cam
...the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors...
Installing Solar Charger for battery-powered doorbells
...into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the Solar Charger into the wall anchors...
Installing Wired Video Doorbell (2nd Gen)
...wiring and pipes when drilling. 4. Use the mounting bracket as a guide to mark screw holes on the wall. Wired Doorbell (2nd Gen) | 4EN 5. Install the mounting bracket with the included screws.NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...3. Drill a hole 15 mm to 22 mm (5/8 in to 7/8 in) in diameter. NOTE: Exercise caution for electrical wiring and pipes when drilling. 15 mm–22 mm ENWired Doorbell Pro (3rd Gen) | 4 4. Route the USB-C cable into the...
Installing lens cover for Outdoor Cam Pro
...Outdoor Cam Pro. Lens Cover for Outdoor Cam Pro | 1EN Tools needed Phillips-head screwdriver NOTE: Do not use a drill during installation. Using a drill may damage the lens cover or your device. Flat installation FOR INDOOR USE ONLY 1. Slide the mounting plate in the direction opposite to the UP...
Ring device manuals
...is in the box. Screwdriver - Use the Phillips end for the mounting screws and star-shaped end for the security screw. Drill Bit and Anchors - Use the drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting Screws - Use two to...
Door View Cam
...peepholes. 1080p HD video with Live View and night vision Advanced Motion Detection Knock detection Traditional peephole viewer access Wire and drill-free installation Size External: 4.7 cm x 9.73 cm x 1.98 cm Internal: 5.74 cm x 11.17 cm x 2.95 cm Supported peephole diameter...
Product