Search Results
Showing results for brick
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 7. (Optional) If installing multiple wedge or corner...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. Indoor Cam Plus | 5EN 4. Plug the power cable into...
Installing Outdoor Cam Pro PoE
...Install the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into...
Installing Stick Up Cam
...home's electrical wiring. If installing on a wood surface , screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide...
Installing Wired Video Doorbell Pro (3rd Gen)
...a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 10. (Optional) If installing multiple wedge or corner...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...3. Install the mounting plate with the UP arrow pointing toward your desired viewing direction. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Remove the top rubber cap on the back of your...
Installing your Pan-Tilt Indoor Cam
...inches) of space in every direction. Install the mounting plate with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate by...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires through...
Installing Wired Video Doorbell Plus (2nd Gen)
...mount, install the mount over your doorbell wires using the large oval holes, ensuring it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...NOTE: Multiple corner mounts can be stacked together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount...