Search Results
Showing results for walls
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...Screw in Ring Video Doorbell 3 Feed all the wires (and the wire nuts if you used them) into your wall and secure your Ring Video Doorbell 3 on the wall. Be sure you use all four included screws. 6. Install the faceplate Place one of the provided faceplates on your Ring Video Doorbell by slotting it...
Configuring and troubleshooting your in-home chime
...of your doorbell. Move any wires or power accessories out of the way of your in-home chime’s moving parts. Remove your Ring doorbell from the wall and touch the metal part of a screwdriver to both terminal screws at the same time, or touch the doorbell wires together. Do not perform this test...
Ring DIN Rail Transformer (2nd Generation)
...coming into your home at your electric meter. 4. Bypass your existing chime If your transformer is in your consumer unit or mounted separately to a wall, make sure to follow this step. Your existing chime needs to be bypassed because the DIN Rail Transformer is powerful and runs on DC rather than AC...
Using the adapter plate included with your Ring Video Doorbell 2
...you have removed the original Ring doorbell and mounting plate, place the adapter plate with it's smaller side (or the beveled edge) facing the wall. 2. Use the original drill holes You can line up the holes in the adapter plate with the holes left behind from your original Ring mounting bracket...
Solar Charger (2nd Gen) for Battery Doorbells
...the provided wall anchors. Avoid mounting the Solar Charger on porches or in shady areas. Installation guide Do I need to drill new holes in the wall to install the Solar Charger? The Solar Charger can be mounted using the same holes as the original bracket. If you are using a Corner or Wedge Kit...
Floodlight Cam Wired Pro
...AC power (100-240 VAC) (professional installation recommended) • Integrated mounting bracket and adjustable floodlight • Can be mounted on a wall or ceiling Wifi Connectivity 802.11 a/b/g/n/ac @ 2.4 GHz and 5 GHz (channels 100 and above). 2 Mbps upload speed is recommended for optimal...
ProductEnclosure for Ring DIN Rail Transformer
...to your existing doorbell first. Open the two holes and put in the grommets. Pass the cables through the holes. Mount the back enclosure on the wall. Connect power to the bottom L & N terminals and the doorbell to + & - (doorbell wires can go in either terminal). Note: If you are using a third...
Wired Video Doorbell Plus (2nd Gen)
...1 Live View and Two-Way Talk 3D Motion Detection Low-Light Sight Real-time notifications via the Ring app Size 13.2 x 3 x 5.4 cm (without wall mount) Video 2K QHD (1920x1920) Display (with HDR), Head-to-Toe Video, Low-Light Sight and Adaptive Night Vision Motion Detection Advanced Motion...
ProductInstalling Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...level and mark screw holes. 5. Install junction box. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 6. Cover screws with rubber caps. Optional: Use the built-in hooks to hold the S-hook. 7. Connect wires. Fasten earth screw with a minimum...
Solar Charger for the Ring Video Doorbell 2 Information
...this, it means that it still updating and installing the firmware update. Give it a few minutes to complete. Do I have to drill new holes in the wall to install the Solar Charger? No. The Solar Charger can be mounted using the same holes as the original bracket. Purchases, refunds and warranties...