Search Results
Showing results for scanning-front
Using Motion Detection
...that will prevent the device from detecting motion. Before you begin troubleshooting, make sure that you have removed the plastic film from the front of your device. Make sure your Ring app and mobile device are up to date...
Installing your Pan-Tilt Indoor Cam
...Physically install your Pan-Tilt Indoor Cam with this step-by-step guide. Hardware included Tools needed Download the Ring app. Scan the QR code on your device. Choose a location. Flat installation Place your camera on a level surface with 16.5 cm (6.5 inches) of space in every...
Installing Spotlight Cam Plus or Pro
...your Ring Spotlight Cam Plus or Pro Battery, Solar or Plug-In. Quick Start 1. Download and open the Ring app. 2. Select Set Up a Device . 3. Scan QR code with the Ring app . Hardware included Security screw for metal collar Mounting screws Wall anchors Tools needed Phillips-head screwdriver...
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...Place your Ring Video Doorbell 3 over the holes. Don't forget to remove the level tool from the front of the device. 5. Screw in Ring Video Doorbell 3 Feed all the wires (and the wire nuts if you used them) into your wall and secure your Ring Video...
Setting up two-step verification for Ring
...Tap Copy Key to copy the Setup Key, then tap Continue and follow the in-app prompts. If you have the authenticator app on another device, you can scan the QR code and follow the in-app prompts. Selecting WhatsApp verification To receive your verification codes through WhatsApp, follow these steps...
Passwordless sign-in using passkeys
...Follow the on-screen instructions for using a passkey from another device. Scan the QR code with the mobile device where your passkey is stored. Follow the prompts to sign in. How to remove a passkey To remove a passkey, you...
Using light settings for Ring security cameras
...turn on when motion is detected. Note: You can use the Linked Devices feature to trigger the lights when motion is detected (e.g., a motion at my front doorbell triggers the light on the garage Floodlight Cam...
Physically installing your Stick Up Cam Wired
...screw, then pull off the bottom cover. Once removed, it will reveal a USB port, an Ethernet port, an orange button, and a QR code that you'll scan while setting up Stick Up Cam Wired in the Ring app. Note: Keep this cover within reach! When you connect your Ethernet cable to the Stick Up Cam...
Installing your Indoor Cam (1st Gen)
...Try it out: After setup, tap the Live View button in the Ring app to see live video from your Indoor Cam. Blue light flashing? If the light on the front of your Indoor Cam is flashing after setup, it’s updating its software. Do not unplug your Indoor Cam while the light is flashing! 2. Install your...
Set up Amazon Key Access (for residents and staff)
...If your mobile device is not scanning the QR code, tap Set up a non-Ring device or choose manually to continue through the setup process. Note: During setup, when asked Where would...