Search Results
Showing results for -side
Using the Ring app: features and functions
...Menu (≡) : The three-line icon in the top-left corner opens a side menu with the app's full functionality. Location name : When setting up a new Ring device, you'll need to assign it to a Location. Locations let...
Inspecting Door View Cam's flex cable
...is waking the device up. To access the flex cable Remove the battery cover from the indoor portion of the Door View Cam by pinching it from both sides and pulling it towards you. The cover should pop right off without any force being applied...
Ring Video Doorbell Pro setup mode
...When setting up Ring Video Doorbell Pro, put the device in setup mode by pressing and releasing the small button on the right side of the doorbell. Note: The device will automatically go into setup mode the first time it receives power. Frequently asked questions What is setup...
Learn About Ring Law Enforcement Guidelines
...of the device Security Cams - Look near the power cord, near mounting connection, on the back. On the box: usually near the barcode or the bottom side of the box. If the MAC ID is unavailable, we may be able to search by name, address, telephone number and/or email address. Please note, however...
Installing Outdoor Cam Pro PoE
...capable of PoE+ is active and connected to a functioning Category 5 Ethernet cable. Junction box installation Use a coin to unscrew a cap from the side or back of the junction box. Install the included junction box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use...
Using the adapter plate included with your Ring Video Doorbell 2
...your original Ring Video Doorbell Once you have removed the original Ring doorbell and mounting plate, place the adapter plate with it's smaller side (or the beveled edge) facing the wall. 2. Use the original drill holes You can line up the holes in the adapter plate with the holes left behind...
Installing your hardwired transformer kit
...wire clip and insert this wire, snapping the orange lever down to secure the wire. The red wire supplied with your device should be on the other side of the wire clip...
Physically installing your Stick Up Cam Wired
...the rubber pad into the bottom of the base. Step Five: Drive the screws Hold the circular part of the base against your wall or ceiling, rubber side down. If you're mounting Stick Up Cam on a wall, use the provided level to ensure it's straight. Mount your Stick Up Cam with the included screws...
Installing Solar Charger for battery-powered doorbells
...For doorbells with a removable battery: Loosen the screw terminals on the back of your doorbell. Insert the Solar Charger wire connector with UP side facing forward. Tighten the terminal screws. Fit your doorbell into the Solar Charger and secure with screws. Tuck the retractable wire into the...
Charging your Ring Video Doorbell
...security screws located on the bottom of the device. Peephole Cam does not have security screws. Remove the faceplate or cover: Press in on the sides of the faceplate or cover and pull it out and off...