Search Results
Showing results for mount
Installing Outdoor Cam Plus Battery
...camera and use it to plug the bottom. 7. Attach the camera mount to the back of your camera with its screw. 8. Clasp the camera mount and attach your camera to the mounting plate by sliding until you feel a click. 9. Unclasp the camera mount and tighten the security screw. 10...
Proper positioning for your Stick Up Cam Wired
...jolts or shakes from people bumping into it, which can change the view angle of the camera. Try mounting the camera in a corner of the room to get maximum coverage of the space. Don't mount your camera directly across from a window, especially one where the rising or setting sun might create...
Installing Indoor Cam Plus
...for the included wall anchors. Indoor Cam Plus | 5EN 4. Plug the power cable into your camera. 5. Swivel your camera’s mount toward the back. 6. Secure your camera to the mounting plate by sliding until you feel a click...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. NOTE: Multiple wedge mounts can be stacked together. We do not recommend more than two. On stucco, brick, or...
Installing Battery Video Doorbell Plus (2nd Generation)
...If installing multiple wedge or corner mounts, insert screws through both mounts to hold them together. NOTE: We do not recommend more than two. 5. Install the mounting bracket on your mount or directly on the mounting surface with the included screws...
Physically installing your Stick Up Cam Elite
...plastic cover and rubber pad from the base. You’ll put the cover back on once you’ve mounted your Stick Up Cam. 2. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceiling mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam...
Installing your Pan-Tilt Indoor Cam
...until you feel a click. Secure your camera and bracket to the mounting plate by sliding until you feel a click. Ceiling installation Use the mounting plate as a guide to mark screw holes on the ceiling with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP...
Installing Battery Doorbell (2nd Gen)
...on the wall. 3. Install the mounting bracket directly onto the mounting surface with the included screws. (Optional) On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. Mount your doorbell by hooking it over the bracket. NOTE : Ensure the...
Remounting Outdoor Cams and Stick Up Cams to fix rotated view
...Note: Mounting your camera incorrectly may also affect the camera’s motion detection accuracy due to incorrect positioning of the motion sensor. Using a Stick Up Cam Mount If you are mounting your Stick Up Cam on the ceiling, use an adjustable Stick Up Cam Mount. The mount can also be...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 10. (Optional) If installing multiple wedge or corner mounts, insert...