Search Results
Showing results for factor-first'
Installing Stick Up Cam Pro
...Use provided cable clips to secure any cables to your wall. Use a 6 mm drill bit to pre-drill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick. If using the Plug-In Adapter, you can secure the power adapter to the wall with the...
Pan-Tilt Indoor Cam
...Learn about our first integrated pan-tilt indoor camera. Motorised pan-tilt with 360° pan coverage Built-in Privacy Cover 1080p HD video & colour night vision Two-Way...
ProductProper positioning for your Stick Up Cam Wired
...Standard power or PoE Your first consideration when choosing where to place your Stick Up Cam is how you're going to power it. Your Stick Up Cam Wired comes with a new feature...
Physically installing your Stick Up Cam Elite
...physically installing it. Click here for instructions on setting up your Stick Up Cam Elite in the Ring app. 1. Slide off the bottom cover The first step in installing your Stick Up Cam is sliding off the bottom cover. Use the orange Ring screwdriver included in your box to remove the security...
Installing your Indoor Cam (1st Gen)
...app walks you through setting up and managing your Indoor Cam. Search for “Ring” in one of these app stores, or visit: ring.com/app. Power it up: First, plug the included power cable into the back of your Indoor Cam. Then plug the power supply into a socket...
Physically installing your Stick Up Cam Wired
...Learn how to install Stick Up Cam Battery Step One: Slide off the bottom cover The first step in installing your Stick Up Cam is sliding off the bottom cover. Use the orange screwdriver included in your box to remove the security screw...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...11. Connect the USB-C cable and doorbell wiring to the back of your doorbell. NOTE : If connecting to an in-home chime, attach the doorbell wiring first. 12. Mount your doorbell by hooking it over the bracket and pushing down. 13. Tighten the security screw. 14. Reattach the faceplate. Adapter...
Control pan-tilt cameras in the Ring app
...Outdoor Cam Plug-In (3rd Gen) with the purchase of an Indoor/Outdoor Pan-Tilt Mount : 360° pan coverage, 117° tilt coverage Calibration When you first set up your camera and whenever it is powered on after being off, the device will calibrate by panning and tilting in each direction. Make sure...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...doorbells aren’t rated for use with a 24 VAC transformer. 1.1 Turn off power at the fusebox Since you’ll be working with high-voltage electricity, first turn off the main power switch on your fusebox or consumer unit. 1.2 Locate your existing doorbell transformer Your transformer is most likely in...
Installing Spotlight Cam Plus or Pro
...Use provided cable clips to secure any cables to your wall. Use a 6 mm drill bit to pre-drill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick...