Search Results
Showing results for -side
Physically damaged devices
...installing your Ring device under a protective overhang. Stuck button If your doorbell button or setup button is stuck: Wiggle the button side to side and in a circular motion. Check for debris around the button edges, and remove any obstructions. Press the button down firmly and release. Repeat...
Installing No-Drill Mount for Ring battery doorbells
...Attach the Wedge or Corner Kit using the two included bracket screws. If installing on a Wedge Kit, insert screw a into a threaded hole on either side of the bottom opening...
24/7 Recording
...Pinch and expand the timeline on screen to zoom in. Pinch and contract the timeline on screen to zoom out. Slide side-to-side to move the timeline toward the present or past. See your Events as markers on the timeline. While recording continuously, all types of Events will...
Installing Stick Up Cam
...a table or shelf Stick Up Cam includes a pre-installed base for placement on flat surfaces. Adjust the camera angle Rotate the base so its longer side faces forward, then tilt the camera downward. Step 4: Installing on a wall or ceiling To install on a ceiling, use the mount for Stick Up Cam...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...or Corner Kit using the two included bracket screws. Important note : If installing on a Wedge Kit, insert screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit. 5. If your doorbell has a faceplate, use the removal tool included with...
Setting up and controlling Light Groups in the Ring app
...your Ring devices allows them to react intelligently to events that happen on your property. You can, for example, turn on all the lights on one side of the house when any Spotlight Cam or Floodlight Cam in the group detects motion. You can also turn on and off and control all camera lights...
Remounting Outdoor Cams and Stick Up Cams to fix rotated view
...to secure it. Make sure the UP arrow on the base is pointing upwards. If you need the camera to look further down, rotate the base so the longer side faces the front and tilt the camera down to your preferred angle. Outdoor Cam Battery/Solar Get step-by-step instructions for installing your...
Installing Outdoor Cam Pro Plug-In
...1. Place your camera on a level surface with 5.5 in (14 cm) of space in every direction and plug in. NOTE: For a downward angle, face the longer side of the base toward the front and tilt your camera down accordingly. 2...
Installing Outdoor Cam Plus Plug-In
...a good seal. The line on the plug should be covered by the port, with the triangle remaining visible. NOTE: For a downward angle, face the longer side of the base toward the front and tilt your camera down accordingly. 2. Plug the power adapter into an outlet. 3. Tighten the security screw on the...
Installing Stick Up Cam Pro
...Adjusting the camera angle Rotate the base so its longer side faces forward, then tilt the camera downward. Positioning on a wall, ceiling, or eave Remove the decorative cover from the camera mount. Use a...