Search Results
Showing results for removed
Passwordless sign-in using passkeys
...another device. Scan the QR code with the mobile device where your passkey is stored. Follow the prompts to sign in. How to remove a passkey To remove a passkey, you need to delete it from both Ring and your device. To delete the passkey from the Ring app: Open the Ring app to the main dashboard...
Transfer ownership of a Ring device
...app, not on ring.com. Transfer ownership of a device to someone else To transfer ownership to another person, follow these steps to transfer or remove one or multiple devices on your account...
Installing lens cover for Outdoor Cam Pro
...Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Unscrew to detach the camera mount. 3. Remove the two rubber caps on the back of your camera. NOTE: Store the rubber caps in a safe place. Reinsert when the hole is...
Installing Ring Door View Cam
...your fingers to finish unscrewing it and remove it completely. Note: You may have to secure the outdoor side of the peephole while unscrewing the indoor portion to keep it from spinning. 4. Remove the outdoor half of the peephole. With the indoor side removed, the outdoor portions should slide right...
Replacing the cable on your Door View Cam
...old cable Remove the adhesive The replacement cable will have an adhesive strip that is used to attach it to the tube. Peel the backing off the adhesive strip and attach the cable to the tube in the same location you removed the old cable. Plug in the new cable With the old cable removed, plug the...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...from its housing unit Traditional DIN Rail transformers are 35 mm wide. The Ring DIN Rail Transformer can be removed from its housing to be a more compact 17.5 mm. To remove, spread the two sides of the housing outwards, and push the transformer unit up from below. 6. (Optional) If required...
Installing Indoor Cam Plus
...4. Pull the tabs to remove. Using the lens cover 1. To cover your camera, slide the lens cover to the locked position until you hear a click. Indoor Cam Plus | 9EN 2. To uncover your camera, slide the lens cover to the unlocked position until you hear a click. Removing the lens cover 1. Slide...
Setting up and controlling Light Groups in the Ring app
...Settings . Tap Edit Group . Tap the toggle next to a device to remove it from the group. Tap Save . Removing a group Select the Group you wish to remove. Tap General Settings. Tap Remove This Group...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. 3. Install the mounting...
Charging your Ring Video Doorbell
...Source and Battery Level. Charging a Ring Video Doorbell with a removable battery Follow these steps to charge the Quick Release Battery Pack for your doorbell: Remove the security screws: Use the included security screwdriver to remove the security screws located on the bottom of the device...