Search Results
Showing results for home--insert'
Installing Ring Video Doorbell Wired
...wall. 10. Install the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11...
Hardwiring your battery-powered Ring doorbell
...If your doorbell wires are too short, you can attach the included wire extenders using the included wire nuts. Using Plug-In Adapter Insert the plug-in adapter connectors underneath the terminal screws on the rear of your doorbell, then tighten the terminals to secure. Step 6: Mounting...
Troubleshooting unresponsive devices
...Battery or use a different Quick Release Battery Pack. Make sure the Quick Release Battery is completely inserted and clicks into place. For devices with multiple battery slots, try inserting Quick Release Batteries into each slot. Power cycle by removing the battery for 10 seconds. Factory reset...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...over the spacer with the included screws. 9. (Optional) If connecting to an in-home chime, prepare the doorbell wiring by creating a U shape in the wire toward the left. 10. Remove your doorbell’s faceplate by inserting the removal tool into the slot at the bottom of your doorbell...
Installing your Hardwired Kit for Spotlight Cam
...brick or stucco, pre-drill these holes with the included bit and push the included anchors into the holes. Next, secure the earth wire from your home (bare copper or green/yellow jacketed) under the earthing screw...
Installing Ring Door View Cam
...home, consider storing the peephole in a safe place in case you have to reinstall it one day. Smooth out the hole’s edges with the tool. 5. Place the outdoor assembly. From the front side of your door, insert the tube through the hole until your Door View Cam is flush with the door. Once inserted...
Using a Wedge Kit or Corner Kit with your doorbell
...damage the device. Feed any doorbell wires, Plug-In Adapters, or Solar Charger cables through the large middle hole of the Wedge or Corner Kit. Insert the included screws into the holes on the mount. For Wired Doorbell Pro, use the screws from bag A. For all other doorbells, use the medium or...
Installing Wired Video Doorbell Plus (2nd Gen)
...multiple wedge or corner mounts, insert screws through both mounts to hold them together. 11. Install the mounting bracket on your mount or directly over the doorbell wiring with the included screws. 12. Remove your doorbell’s faceplate by inserting the removal tool into the slot at the...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...multiple wedge or corner mounts, insert screws through both mounts to hold them together. 5. Install the mounting bracket on your mount or directly over the doorbell wiring with the included screws. 6. Remove your doorbell’s faceplate by inserting the removal tool into the slot at the...
Creating a routine with Alexa and your Ring device
...Tap Smart Home. Select your device from the Choose Device screen. Choose the Ring device you are creating the Routine for. Select which behaviour will trigger...