Search Results
Showing results for star-system
Changing your Video Doorbell faceplate
...the faceplate for Battery Video Doorbell Pro, Battery Video Doorbell Plus and Video Doorbell 2, 3, 3 Plus and 4. Remove the security screw. Use the star-shaped bit (T15 Torx) screwdriver that came with your device. Remove the faceplate. Pull the bottom edge of the faceplate toward you to remove...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...Power Kit, should look similar to this diagram. 3. Install your Video Doorbell Pro Screwdriver - Use the Phillips end for the mounting screws and star-shaped end for the security screw. Drill bit and anchors - Use a 6mm drill bit with a power drill to drill holes for the (optional) anchors if...
Physically installing your Stick Up Cam Elite
...using the star-shaped end of the screwdriver bit. Snap the cover back onto the base. Then, secure it with the included security screw, using the star-shaped end of the screwdriver bit. Now your Stick Up Cam is installed and ready to protect you. That's it! Your Ring Stick Up Cam Elite is...
Physically installing your Stick Up Cam Wired
...any connected cables have been routed through the bottom cover, slide the cover into place on your Stick Up Cam. Then, tighten the screw with the star-shaped end of the screwdriver bit. Step Seven: Snap the cover onto the base Snap the cover onto the base. Secure it with the included short...
Getting Spare Parts Kits
...Learn more about our return policy and process. Screw use warning. When securing your Ring device with the security screw(s), only use the small star-shaped screws that came with your device. Do not use any other screws...
Charging your Ring Video Doorbell
...to power back on : It can take up to 60 seconds. Screw use warning. When securing your Ring device with the security screw(s), only use the small star-shaped screws that came with your device...
Installing your Stick Up Cam Battery (2nd Gen)
...rear of your Stick Up Cam with the line on the battery cover. Push the cover on and twist clockwise to lock into place. Tighten the screw Use the star-shaped end of your Ring screwdriver to tighten the security screw on the bottom of your Stick Up Cam...
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...Doorbell by slotting it in at the top and clicking it into place. 7. Tighten the security screw Use one of the provided security screws and the star-shaped end of the screwdriver bit to secure the faceplate. Click here for information on setting up your Ring Video Doorbell 3 in your Ring app...
Installing Spotlight Cam Pro (2nd Gen) Wired
...combustible or flammable surfaces. The Hardwired Kit must be installed on a wall or eave. 1. Shut off power at the breaker. Note: If your power system is classified as OVC III, please check the building “Distribution Panel”, Ex switch panel has installed Surge Protectors. Ensure that the surge...
Spotlight Cam (1st Gen)
...Compatible Accessories • Quick Release Battery Pack • Solar Panel (Barrel Plug) • Solar Panel USB-C • Small Solar Panel USB-C Software Security System Requirements...
Product