Search Results
Showing results for install
Installing battery-powered doorbells
...mounting surface If using a Wedge Kit, Corner Kit , or mounting bracket with your device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included...
Installing your Indoor Cam (1st Gen)
...Set up and install your Indoor Cam with this step-by-step guide, or view the installation guide video . Note that you should set up your Indoor Cam in the Ring app before physically installing it. 1. Set up your Indoor Cam Download the Ring app The...
Installing your Ring Indoor Cam (2nd Gen)
...Hardware included Tools needed For wall or ceiling installation: Choose a location. Warning: Ring Indoor Cam (2nd Gen) and its accessories are for indoor use only. Don’t expose your device to steam, extreme heat or cold. For example, do not install your device near any heat sources such as space...
Installing Stick Up Cam Pro
...the camera mount and click it into place. Step 5: Installing the security screws Install the security screw on the battery compartment, even if you are not using batteries. Step 6: Connecting external power options Follow our guide for installing your Ring Solar Panel before connecting it to the...
Installing Outdoor Cam Pro Plug-In
...3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall...
Installing Stick Up Cam
...Up Cam includes a pre-installed base for placement on flat surfaces. Adjust the camera angle Rotate the base so its longer side faces forward, then tilt the camera downward. Step 4: Installing on a wall or ceiling To install on a ceiling, use the mount for Stick Up Cam. Install the mounting plate On...
Installing Ring Video Doorbell Wired
...of the two mounting holes on your wall. 10. Install the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11...
Installing Battery Doorbell (2nd Gen)
...CAUTION! You’ll be working with electrical wires during the install process. If you encounter damaged or unsafe wiring, or if you are unsure, uncomfortable, or inexperienced, please consult with a licensed...
Installing your Solar Panel (USB-C) (2nd Gen)
...This article outlines the step-by-step process to install your Solar Panel (USB-C) (2nd Gen). Choose an install location with the most direct sunlight. If you are in the Northern Hemisphere, direct your Solar Panel toward the south. If you are in the...