Search Results
Showing results for button-up
Reset or power cycle your Ring device
...button for 20 seconds, then release. Chimes: Hold the setup button for 20 seconds, then release. Locate your device’s setup button Device setup button location will vary based on the type and model of your device. This section will provide general locations for each device type. Doorbells For...
Setting up Alert Tones in the Ring app
...for that device. If you are adjusting a Ring Video Doorbell, you can select one sound for Motion Alerts and one for doorbell rings. Tap the back button on the top left to go back to the previous menu. If you have a Ring Chime, Chime (3rd Gen) or Chime Pro, you can also adjust the notifications for...
Inspecting Door View Cam's flex cable
...The LED light on the front lights up when you press the button but there's no ding tone on your mobile device, even though Ring Alerts are turned on. The infrared camera isn't turning on at night even though...
Video doorbell setup guide
...by-step tutorial in the Ring app to prepare, install, and power on your doorbell. Step 6: Connecting to the doorbell for setup Press the setup button on your doorbell when prompted by the app. This creates a temporary wifi network for completing setup. Keep your mobile device close to the...
Security camera setup guide
...by-step tutorial in the app to prepare, install, and power on your camera. Step 6: Connecting to the security camera for setup Press the setup button on your camera when prompted by the app. This step creates a temporary wifi network for completing setup. Keep your mobile device close to the...
Ring Video Doorbell Pro setup mode
...Ensure that you are pressing the button firmly and releasing it immediately without holding it down. Your Video Doorbell Pro isn't receiving power. Performing a hard reset If the light...
Installing your Indoor Cam (1st Gen)
...Set up your Indoor Cam in the Ring app Learn how to set up Indoor Cam in the Ring app Try it out: After setup, tap the Live View button in the Ring app to see live video from your Indoor Cam. Blue light flashing? If the light on the front of your Indoor Cam is flashing after setup...
Understanding Controls in the Ring app
...icon on the left. Controls gives you control over lights and sirens on your ring devices. How do Controls work? When in Live View, tap the button on the bottom left to access Controls. Within Controls, Device Control shows the current status of, and provides toggles to activate, the light...
Rebooting your Ring Video Doorbell or Security Camera
...to the device. The device will reboot when the battery is reinserted. For Ring devices with an internal battery, briefly press and hold the setup button (you may have to unscrew the device from the wall to access the setup button). Temporarily shut off the power at the consumer unit. For wired Ring...
Chime, Chime Plus and Chime Pro setup guide
...Device . Plug your Chime into a wall outlet. If the light is flashing, tap The light is flashing If the light is not flashing, press and hold the button on the side of the chime for five seconds. Have your wifi password ready to enter. When prompted, join the Ring wifi network. Connect with...